Mahogany (Swietenia spp.)
Hoopwood; split poles; piles, pickets and stakes of wood, pointed but not sawn lengthwise; wooden sticks, roughly trimmed but not turned, bent or otherwise worked, suitable for the manufacture of walking-sticks, umbrellas, tool handles or the like; chipwood and the like. > Of Hem-fir (Western hemlock (Tsuga heterophylla) and fir (Abies spp.)) > Other > End-jointed, treated or combination species: > Mahogany (Swietenia spp.)
Duty Rate (from China)
Products classified under Tariff item 4407.21.00.00
End-Jointed Mahogany Finger-Joint Blocks 12mm Thick
End-jointed mahogany finger-joint blocks, 12 mm thick, made from Swietenia spp. and assembled via finger-jointing, then sanded. They are sawn lengthwise and exceed 6 mm in thickness, qualifying as wood of heading 44.07, and are classifiable under tariff item 4407.21.00 as mahogany (Swietenia spp.).
4407.21.00Mahogany Stair Tread Blanks Sawn Lengthwise
Pre-cut mahogany stair tread blanks, sawn lengthwise from Swietenia spp., over 6 mm thick, and planed on top and bottom. These are unfinished sawn wood products for architectural millwork, falling under tariff item 4407.21.00 as mahogany (Swietenia spp.).
4407.21.00Planed Mahogany Drawer Sides 19mm Thick
Sawn and planed mahogany drawer sides, 19 mm thick, made from Swietenia spp., exceeding 6 mm thickness. These are unfinished lumber components for custom furniture, classifiable under tariff item 4407.21.00 as mahogany (Swietenia spp.).
4407.21.00Planed Mahogany (Swietenia mahagoni) Boards 8mm Thick
End-jointed and sanded boards from Cuban mahogany (Swietenia mahagoni), 8 mm thick, sawn lengthwise for fine joinery. These boards exceed 6 mm in thickness and are classifiable under tariff item 4407.21.00 as mahogany (Swietenia spp.).
4407.21.00Quarter-Sawn Mahogany Lumber for Boat Building
Quarter-sawn Swietenia macrophylla planks exceeding 6 mm, planed for marine applications with high rot resistance. These are sawn lengthwise and classifiable under tariff item 4407.21.00 as mahogany (Swietenia spp.).
4407.21.00Sanded Ribbon Grain Mahogany for Cabinet Doors
Ribbon figure mahogany (Swietenia macrophylla) sawn and sanded to 10 mm thickness for raised panel doors. These are unfinished sawn wood products, classifiable under tariff item 4407.21.00 as mahogany (Swietenia spp.).
4407.21.00Sawn Genuine Mahogany Lumber (Swietenia macrophylla)
Sawn genuine mahogany lumber from Swietenia macrophylla, thickness exceeding 6 mm, typically planed and sanded for woodworking. This is standard sawn tropical wood, classifiable under tariff item 4407.21.00 as mahogany (Swietenia spp.).
4407.21.00Sawn Mahogany Architrave Moulding Blanks
Lengthwise sawn Swietenia spp. trim blanks over 6 mm thick, sanded for colonial moulding profiles. These are unfinished sawn wood products, classifiable under tariff item 4407.21.00 as mahogany (Swietenia spp.).
4407.21.00Sliced Mahogany Flitch for Veneer Preparation
Lengthwise sliced Swietenia spp. flitches over 6 mm thick, lightly sanded but not reduced to thin veneer sheets. These are sawn or sliced wood products, classifiable under tariff item 4407.21.00 as mahogany (Swietenia spp.).
4407.21.00Swietenia Sawn Lumber for Guitar Neck Blanks
Quartersawn mahogany neck blanks from Swietenia spp., 25 mm thick, sanded for luthiers. These are sawn wood products exceeding 6 mm, classifiable under tariff item 4407.21.00 as mahogany (Swietenia spp.).