Heavy Duty V-Belt A-Section 120 Inch
Heavy-duty trapezoidal V-belt with an A-section, made of vulcanized rubber for industrial transmission in agricultural equipment and conveyor drives. It is not an endless belt and is beyond standard OEM sizes, placing it in the 'other' category. The rubber composition and trapezoidal cross-section meet Chapter 40 definitions.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the belt is endless and exceeds 240 cm in circumference
Endless V-belts over 240 cm are classified under this sibling item.
If the belt is endless and for agricultural machinery
Endless transmission belts for agricultural use have a dedicated item.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the belt is not endless; if it is, check circumference for potential reclassification
• Document the agricultural or conveyor application to support the tariff item
• Provide rubber vulcanization details for CBSA compliance
Related Products under Tariff item 4010.39.90
3V-Section Narrow V-Belt with Cotton Duck Fabric
A narrow 3V-profile V-belt made of vulcanized rubber, reinforced and covered with cotton duck textile fabric. Designed for high-speed fractional horsepower applications in HVAC systems, the cotton duck provides flexibility and wear resistance. It is classified under tariff item 4010.39.90 as 'other' transmission belting of vulcanized rubber, not meeting the endless or outside circumference criteria of the sibling item.
5VX Cogged V-Belt with Aramid Fabric Jacket
A cogged 5VX-section V-belt made from vulcanized rubber with embedded aramid textile fibers and an outer fabric jacket. The cogged design and aramid reinforcement provide superior heat and flex resistance for heavy-duty compressor applications. It falls under tariff item 4010.39.90 as 'other' transmission belting, as it is not endless or exceeds the circumference threshold of the sibling item.
Aramid Fiber Endless V-Belt for Industrial Drives
An endless transmission V-belt made of vulcanized rubber reinforced with aramid fibers, where the man-made textile fibers predominate by weight. Exceeding 20 cm in width, it is designed for high-tension industrial drives and falls under tariff item 4010.39.90 as 'Other' transmission belting.
Aramid Reinforced V-Belt 8V-40
Aramid-reinforced V-belt with an 8V-40 trapezoidal cross-section, designed for high-speed conveyor systems. The aramid cord reinforcement does not alter its classification under rubber transmission belting, as the belt remains a vulcanized rubber product. It is not an endless belt of the type specified in the sibling tariff item, so it falls under the 'other' category.
Automotive Accessory V-Belt 6PK with Nylon Jacket
An automotive accessory V-belt with a 6-rib PK-section design, made of vulcanized rubber with a nylon textile jacket. Despite its automotive use, it is classified under tariff item 4010.39.90 as 'other' transmission belting because it is not endless or exceeds the circumference limit of the sibling item. The trapezoidal multi-rib design is typical for serpentine systems.
B-Section V-Belting with Nylon Reinforcement
Endless V-belting in B-section trapezoidal profile, made of vulcanized rubber combined with nylon textile cords for tensile strength and a fabric outer layer. Used in automotive accessories and agricultural equipment for motion transmission. It is classified under tariff item 4010.39.90 as 'other' because it does not meet the outside circumference criterion of the sibling item 4010.39.10.