Other
Conveyor or transmission belts or belting, of vulcanized rubber. > Transmission belts or belting: > Other > Other > Other
Duty Rate (from China)
Subheadings
Products classified under Tariff item 4010.39.90
3V-Section Narrow V-Belt with Cotton Duck Fabric
A narrow 3V-profile V-belt made of vulcanized rubber, reinforced and covered with cotton duck textile fabric. Designed for high-speed fractional horsepower applications in HVAC systems, the cotton duck provides flexibility and wear resistance. It is classified under tariff item 4010.39.90 as 'other' transmission belting of vulcanized rubber, not meeting the endless or outside circumference criteria of the sibling item.
5VX Cogged V-Belt with Aramid Fabric Jacket
A cogged 5VX-section V-belt made from vulcanized rubber with embedded aramid textile fibers and an outer fabric jacket. The cogged design and aramid reinforcement provide superior heat and flex resistance for heavy-duty compressor applications. It falls under tariff item 4010.39.90 as 'other' transmission belting, as it is not endless or exceeds the circumference threshold of the sibling item.
Aramid Fiber Endless V-Belt for Industrial Drives
An endless transmission V-belt made of vulcanized rubber reinforced with aramid fibers, where the man-made textile fibers predominate by weight. Exceeding 20 cm in width, it is designed for high-tension industrial drives and falls under tariff item 4010.39.90 as 'Other' transmission belting.
Aramid Reinforced V-Belt 8V-40
Aramid-reinforced V-belt with an 8V-40 trapezoidal cross-section, designed for high-speed conveyor systems. The aramid cord reinforcement does not alter its classification under rubber transmission belting, as the belt remains a vulcanized rubber product. It is not an endless belt of the type specified in the sibling tariff item, so it falls under the 'other' category.
Automotive Accessory V-Belt 6PK with Nylon Jacket
An automotive accessory V-belt with a 6-rib PK-section design, made of vulcanized rubber with a nylon textile jacket. Despite its automotive use, it is classified under tariff item 4010.39.90 as 'other' transmission belting because it is not endless or exceeds the circumference limit of the sibling item. The trapezoidal multi-rib design is typical for serpentine systems.
B-Section V-Belting with Nylon Reinforcement
Endless V-belting in B-section trapezoidal profile, made of vulcanized rubber combined with nylon textile cords for tensile strength and a fabric outer layer. Used in automotive accessories and agricultural equipment for motion transmission. It is classified under tariff item 4010.39.90 as 'other' because it does not meet the outside circumference criterion of the sibling item 4010.39.10.
Classical A/B/C V-Belt Set with Polyamide Textile
A matched set of classical A, B, and C section V-belts made from vulcanized rubber combined with polyamide textile plies. Designed for multi-groove pulleys in manufacturing lines to ensure synchronized drive. The set is classified under tariff item 4010.39.90 as 'other' transmission belting, as the individual belts do not meet the endless or circumference criteria of the sibling item.
Classical V-Belt C-Section Long
Extended-length classical C-section trapezoidal V-belt made of vulcanized rubber, used for large industrial fans and ventilation systems. Its non-standard length places it outside the 'endless' category, and its trapezoidal cross-section fits the transmission belting definition. It is not designed for automotive or vehicle-specific applications.
Cogged 8V V-Belt with Polyester Fabric
A large 8V cogged V-belt combining vulcanized rubber with polyester fabric, designed for generators. The cogged design reduces slippage and improves flexibility. It is classified under tariff item 4010.39.90 as 'other' transmission belting, as it does not meet the endless or circumference criteria of the sibling item 4010.39.10.
Cogged V-Belt 8V Section Industrial
Cogged trapezoidal V-belt with an 8V profile, made of vulcanized rubber for high-torque industrial transmissions. The cogging reduces slippage in multi-pulley systems like crushers, but does not affect its classification as rubber belting. It is not an endless belt or a vehicle-specific product, so it falls under the 'other' category.
Cotton Cord Wrapped Endless Drive Belt
This endless drive belt is made of vulcanized rubber and reinforced with cotton cords, which predominate by weight over the rubber. It is designed for power transmission in industrial motors, and the cotton textile component qualifies it under this tariff item for transmission belting combined with vegetable fiber textiles.
Cotton Duck Transmission Belt
This heavy-duty transmission belt is made of vulcanized rubber and reinforced with cotton duck canvas, which predominates by weight. It is used for machinery drives and falls under this tariff item as transmission belting combined with vegetable fiber textiles.
Cotton-Reinforced Endless Timing Belt
This endless timing belt is made of vulcanized rubber and reinforced with cotton fabric layers that predominate by weight. It is designed for synchronous drive in engines and qualifies under this tariff item as transmission belting combined with vegetable fiber textiles.
Flax Linen Reinforced Power Transmission Belt
This power transmission belt is made of vulcanized rubber and reinforced with flax (linen) textiles that predominate by weight. It is used in textile machinery and falls under this tariff item as transmission belting combined with vegetable fiber textiles.
Fractional Horsepower 4L V-Belt with Rayon Cover
A light-duty 4L fractional horsepower V-belt of vulcanized rubber with a rayon textile cover, suited for small appliances and fans. The trapezoidal cross-section and textile cover ensure smooth operation. It is classified under tariff item 4010.39.90 as 'other' transmission belting, as it does not meet the endless or circumference criteria of the sibling item.
Fractional Horsepower V-Belt B-Profile
Fractional horsepower V-belt with a trapezoidal B-section, made of vulcanized rubber for HVAC systems. It is designed for fractional HP motors and is not an endless belt or vehicle-specific. Its non-standard size places it in the 'other' category of transmission belting.
Heavy Duty D-Section V-Belt with Fiberglass Tensile
A D-section heavy-duty V-belt with fiberglass textile tensile members in a vulcanized rubber body, designed for crushers. The fiberglass reinforcement provides high tensile strength and durability. It is classified under tariff item 4010.39.90 as 'other' transmission belting, as it does not meet the endless or circumference criteria of the sibling item.
Heavy-Duty Polyester V-Belt Conveyor Belt
A heavy-duty transmission belt made of vulcanized rubber combined with polyester textile components, where man-made fibers predominate by weight. Exceeding 20 cm in width, it is used for power transmission in industrial machinery and is classified under tariff item 4010.39.90 as 'Other' transmission belting.
Heavy Duty V-Belt A-Section 120 Inch
Heavy-duty trapezoidal V-belt with an A-section, made of vulcanized rubber for industrial transmission in agricultural equipment and conveyor drives. It is not an endless belt and is beyond standard OEM sizes, placing it in the 'other' category. The rubber composition and trapezoidal cross-section meet Chapter 40 definitions.
Hemp Textile Reinforced V-Ribbed Belt
This V-ribbed transmission belt is made of vulcanized rubber and reinforced with hemp fiber textiles that predominate by weight. It is designed for enhanced grip in automotive applications and qualifies under this tariff item as transmission belting combined with vegetable fiber textiles.
Hexagonal V-Belt 3M Type
Hexagonal double-V trapezoidal rubber belt of the 3M type, designed for twisted drives in agricultural balers. Its hexagonal cross-section allows operation on both sides, but it remains a vulcanized rubber transmission belt. It is not endless or vehicle-specific, so it falls under the 'other' category.
Hexagonal V-Belt 5M with Kevlar Reinforcement
A 5M hexagonal (dual-sided) V-belt combining vulcanized rubber with Kevlar textile reinforcement for serpentine drives in compact machinery. The trapezoidal shape on both sides allows operation in twisted drives. It is classified under tariff item 4010.39.90 as 'other' transmission belting, as it does not meet the endless or circumference criteria of the sibling item.
High-Capacity V-Belt D-Profile
D-profile trapezoidal vulcanized rubber V-belt for high-capacity pumps in water treatment, optimized for shock load resistance. It is not an endless belt or vehicle-specific, placing it in the 'other' category. The rubber composition and profile meet Chapter 40 transmission belting definitions.
Hi-Power II 3VX Belt with Aramid Cords
A 3VX Hi-Power II V-belt with aramid textile cords in vulcanized rubber, designed for high-power transmission. The aramid cords provide exceptional strength and heat resistance. It is classified under tariff item 4010.39.90 as 'other' transmission belting, as it does not meet the endless or circumference criteria of the sibling item.
Industrial Multi-V XPB Belt with Polyester Cord
An XPB profile multi-groove V-belt of vulcanized rubber with longitudinal polyester textile cords and a fabric cover, designed for high-power transfer in mills. The combined construction with textile reinforcement is essential for its function. It is classified under tariff item 4010.39.90 as 'other' transmission belting, as it does not meet the endless or circumference criteria of the sibling item.
Industrial V-Belt 5L Section
Vulcanized rubber transmission belt with a trapezoidal 5L cross-section, designed for power transmission in industrial machinery. It is not an endless belt or vehicle-specific, so it falls under the 'other' category. The 5L section is a non-standard size, distinguishing it from OEM automotive belts.
Jute Fabric Covered Rubber Conveyor Belt
This conveyor belting is made of vulcanized rubber and overlaid with a jute (vegetable fiber) textile cover that predominates by weight. It is used for material handling in agriculture and falls under this tariff item as transmission belting combined with vegetable fiber textiles, despite being for conveying.
Metric MV-Section V-Belt with Cotton Reinforcement
An MV metric V-belt with cotton textile in rubber, designed for European machinery. The cotton reinforcement provides flexibility and strength. It is classified under tariff item 4010.39.90 as 'other' transmission belting, as it does not meet the endless or circumference criteria of the sibling item.
Multi-Groove V-Belt Poly-V 6PK
Multi-groove Poly-V trapezoidal V-belt with 6 ribs, made of vulcanized rubber for serpentine drives in industrial generators. It provides high grip without cogging and is not an endless belt or vehicle-specific. The multi-groove design does not change its classification as rubber transmission belting.
Narrow Wedge V-Belt 3VX Type
Narrow profile 3VX trapezoidal vulcanized rubber V-belt for compact industrial drives, such as textile looms. It is not an endless belt or vehicle-specific, placing it in the 'other' category. The narrow wedge design meets Chapter 40 transmission belting definitions.
Oil-Resistant V-Belt A-50
Oil-resistant A-50 trapezoidal V-belt made of vulcanized rubber with special compounds for oily environments like mills. It is not an endless belt or vehicle-specific, so it falls under the 'other' category. The oil-resistant formulation does not alter its rubber classification.
Raw Edge V-Belt 5L with Polyester Jacket
A 5L raw edge V-belt with a polyester textile jacket in vulcanized rubber, designed for light-duty applications. The raw edge design provides better grip and heat dissipation. It is classified under tariff item 4010.39.90 as 'other' transmission belting, as it does not meet the endless or circumference criteria of the sibling item.
Raw Edge V-Belt 5VX Narrow
Raw edge 5VX narrow trapezoidal vulcanized rubber belt for variable speed drives, with exposed rubber edges for better grip. It is not an endless belt or vehicle-specific, placing it in the 'other' category. The raw edge design is a feature, not a classification change.
Sisal Fiber Laminated Rubber Belting
This rubber belting is laminated with sisal (vegetable) fiber fabric that predominates by weight over other textiles. It is used for heavy-duty transmission and falls under this tariff item as transmission belting combined with vegetable fiber textiles.
Static Conductive V-Belt B-72
Static dissipative B-72 V-belt made of vulcanized rubber for electronics assembly lines, preventing charge buildup. It is not an endless belt or vehicle-specific, so it falls under the 'other' category. The static dissipative property does not change its rubber classification.
Super Gripnotch SPB Belt with Nylon Cover
An SPB Gripnotch V-belt made of vulcanized rubber with nylon textile reinforcement, designed for high-power transmission. The gripnotch design reduces bending stress and improves flexibility. It is classified under tariff item 4010.39.90 as 'other' transmission belting, as it does not meet the endless or circumference criteria of the sibling item.
Temperature Resistant V-Belt 5L-60
Temperature-resistant 5L-60 V-belt made of vulcanized rubber for ovens and freezers, tolerant of heat and cold. It is not an endless belt or vehicle-specific, placing it in the 'other' category. The temperature tolerance is a material property, not a classification change.
V-Belt A-Section with Polyester Fabric Cover
A transmission V-belt with a trapezoidal A-section cross-section made of vulcanized rubber combined with a polyester textile fabric cover for enhanced durability and grip. Designed for power transmission in various industrial applications. It is classified under tariff item 4010.39.90 as 'other' transmission belting, as it does not meet the endless or circumference criteria of the sibling item.
V-Belt with Cotton Textile Reinforcement
This V-belt is made of vulcanized rubber and combined with cotton textile components that predominate by weight. It is used for power transmission in industrial machinery and falls under this tariff item as transmission belting combined with vegetable fiber textiles.
Wrapped V-Belt 4L Light Duty
Wrapped fabric-covered 4L trapezoidal V-belt of vulcanized rubber for light-duty compressors. The fabric wrap protects against abrasion but does not change its classification as rubber transmission belting. It is not an endless belt or vehicle-specific, so it falls under the 'other' category.