SABIC MDPE 3810 Film Grade Pellets
SABIC MDPE 3810 pellets for stretch films and liners, with a density of 0.934 g/cm³, in primary form. The product is polyethylene with ethylene constituting 95% or more by weight and specific gravity below 0.94, meeting the tariff item's classification criteria.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the specific gravity is 0.94 or higher
Polyethylene with higher density is classified separately.
If imported as finished film
Finished film is classified as an article under heading 39.20.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Provide the product datasheet showing density and monomer composition to facilitate customs clearance
• If the pellets are for food-contact film, ensure compliance with Canadian packaging regulations
• Check whether the shipment qualifies for duty-free entry under the Comprehensive Economic and Trade Agreement (CETA) or other trade pacts
Related Products under Tariff item 3901.10.00
Alathon LDPE M6034 Packaging Resin
Alathon LDPE M6034 is a low-density polyethylene resin with a specific gravity of 0.928, supplied in primary pellet form for food packaging films and coatings. Its ethylene monomer content exceeds 95% by weight, and it is FDA compliant for direct food contact, classifying it under this tariff item.
Borouge ME3440 MDPE Pipe Resin
Borouge ME3440 medium-density polyethylene (MDPE) pipe resin with a bimodal structure and specific gravity between 0.934 and 0.938. Supplied in primary form as pellets, this ethylene homopolymer contains over 95% ethylene monomer units, meeting the tariff item's criteria for polyethylene with specific gravity below 0.94.
Branched LDPE Extrusion Grade for Pipes
Branched LDPE Extrusion Grade for Pipes is a traditional branched low-density polyethylene (LDPE) resin for pipe extrusion, with a density of 0.918. It is classified under tariff item 3901.10.00 as a polyethylene with a specific gravity of less than 0.94, in primary form, where ethylene constitutes 95% or more by weight.
Dow Affinity PL 1880G LLDPE Pellets
Dow Affinity PL 1880G is a metallocene-catalyzed linear low-density polyethylene (LLDPE) in pellet form, with a specific gravity below 0.94 and ethylene monomers comprising over 95% by weight. It is classified under tariff item 3901.10.00 as a polyethylene with a specific gravity of less than 0.94, in primary form.
Extrusion Coating LDPE EC-1460 High Viscosity
Extrusion Coating LDPE EC-1460 is a low-density polyethylene resin with a specific gravity of 0.920, supplied in primary pellet form. It is designed for high-speed extrusion coating of paperboard and foil, and its ethylene monomer content exceeds 95% by weight, meeting the classification criteria for this tariff item.
ExxonMobil Escorene MDPE LD-144UA
ExxonMobil Escorene MDPE LD-144UA resin, a medium-density polyethylene homopolymer in pellet form for injection molding. With a specific gravity below 0.94 and ethylene monomer content exceeding 95% by weight, this primary-form polymer is correctly classified under tariff item 3901.10.00.