Polyethylene having a specific gravity of less than 0.94
Polymers of ethylene, in primary forms. > Polyethylene having a specific gravity of less than 0.94
Duty Rate (from China)
Products classified under Tariff item 3901.10
Alathon LDPE M6034 Packaging Resin
Alathon LDPE M6034 is a low-density polyethylene resin with a specific gravity of 0.928, supplied in primary pellet form for food packaging films and coatings. Its ethylene monomer content exceeds 95% by weight, and it is FDA compliant for direct food contact, classifying it under this tariff item.
3901.10.00Borouge ME3440 MDPE Pipe Resin
Borouge ME3440 medium-density polyethylene (MDPE) pipe resin with a bimodal structure and specific gravity between 0.934 and 0.938. Supplied in primary form as pellets, this ethylene homopolymer contains over 95% ethylene monomer units, meeting the tariff item's criteria for polyethylene with specific gravity below 0.94.
3901.10.00Branched LDPE Extrusion Grade for Pipes
Branched LDPE Extrusion Grade for Pipes is a traditional branched low-density polyethylene (LDPE) resin for pipe extrusion, with a density of 0.918. It is classified under tariff item 3901.10.00 as a polyethylene with a specific gravity of less than 0.94, in primary form, where ethylene constitutes 95% or more by weight.
3901.10.00Dow Affinity PL 1880G LLDPE Pellets
Dow Affinity PL 1880G is a metallocene-catalyzed linear low-density polyethylene (LLDPE) in pellet form, with a specific gravity below 0.94 and ethylene monomers comprising over 95% by weight. It is classified under tariff item 3901.10.00 as a polyethylene with a specific gravity of less than 0.94, in primary form.
3901.10.00Extrusion Coating LDPE EC-1460 High Viscosity
Extrusion Coating LDPE EC-1460 is a low-density polyethylene resin with a specific gravity of 0.920, supplied in primary pellet form. It is designed for high-speed extrusion coating of paperboard and foil, and its ethylene monomer content exceeds 95% by weight, meeting the classification criteria for this tariff item.
3901.10.00ExxonMobil Escorene MDPE LD-144UA
ExxonMobil Escorene MDPE LD-144UA resin, a medium-density polyethylene homopolymer in pellet form for injection molding. With a specific gravity below 0.94 and ethylene monomer content exceeding 95% by weight, this primary-form polymer is correctly classified under tariff item 3901.10.00.
3901.10.00ExxonMobil Exceed 1012HA LLDPE Resin
ExxonMobil Exceed 1012HA is a performance linear low-density polyethylene (LLDPE) resin with a hexene comonomer, a specific gravity below 0.94, and ethylene content exceeding 95% by weight. It is classified under tariff item 3901.10.00 as a polyethylene with a specific gravity of less than 0.94, in primary pellet form.
3901.10.00Food Grade LDPE Resin MI 0.5
Food Grade LDPE Resin MI 0.5 is a virgin low-density polyethylene (LDPE) resin with a melt index of 0.5, used for heavy-duty bags and sheets, and compliant with USP Class VI. It is classified under tariff item 3901.10.00 as a polyethylene with a specific gravity of 0.926 (below 0.94), in primary pellet form.
3901.10.00High Clarity LDPE Resin for Packaging
High Clarity LDPE Resin for Packaging is a premium low-density polyethylene (LDPE) with additives for optical clarity in food packaging films, with a specific gravity of 0.919. It is classified under tariff item 3901.10.00 as a polyethylene with a specific gravity of less than 0.94, in primary form, and the additives do not alter its classification.
3901.10.00High Molecular Weight Polyethylene Resin HMWPE-1440
High Molecular Weight Polyethylene Resin HMWPE-1440 is a high molecular weight polyethylene with a relative viscosity of 1.50 and specific gravity below 0.94, supplied in primary pellet form. It is used for extrusion and molding applications, and its ethylene monomer content exceeds 95% by weight, classifying it under this tariff item.
3901.10.00High Viscosity Polyethylene HMWPE 5502 for Pipe Extrusion
High Viscosity Polyethylene HMWPE 5502 is a high molecular weight polyethylene resin with a relative viscosity of 1.55 and specific gravity of 0.918, supplied in primary pellet form. It is formulated for high-pressure pipe manufacturing, and its ethylene monomer content exceeds 95% by weight, falling under this tariff item.
3901.10.00LDPE 0035 Film Grade Pellets
LDPE 0035 is a film-grade low-density polyethylene with a specific gravity of 0.918, optimized for blown film applications. It is supplied in primary pellet form, and its ethylene monomer content exceeds 95% by weight, classifying it under this tariff item.
3901.10.00LDPE 1810 Medical Grade Resin
LDPE 1810 is a USP Class VI medical-grade polyethylene with a specific gravity of 0.919, supplied in primary pellet form for pharmaceutical packaging. Its ethylene monomer content exceeds 95% by weight, and it meets strict biocompatibility requirements, classifying it under this tariff item.
3901.10.00LDPE 20A Blow Molding Resin
LDPE 20A is a low-density polyethylene resin with a specific gravity of 0.920, designed for blow molding bottles and containers. It is supplied in primary pellet form, and its ethylene monomer content exceeds 95% by weight, classifying it under this tariff item.
3901.10.00LDPE Blow Molding Grade for Bottles
LDPE Blow Molding Grade for Bottles is a low-density polyethylene (LDPE) resin optimized for blow molding squeeze bottles, with a density of 0.930 and a melt index of 0.8. It is classified under tariff item 3901.10.00 as a polyethylene with a specific gravity of less than 0.94, in primary pellet form.
3901.10.00LDPE F0018 Injection Molding Grade
LDPE F0018 is a low-density polyethylene resin with a specific gravity of 0.916, optimized for injection molding closures and caps. It is supplied in primary pellet form, and its ethylene monomer content exceeds 95% by weight, classifying it under this tariff item.
3901.10.00LDPE Film Grade Resin 0.922 Density
LDPE Film Grade Resin 0.922 Density is a low-density polyethylene (LDPE) resin designed for blown film extrusion, with a density of 0.922 g/cm³ and high clarity. It is classified under tariff item 3901.10.00 as a polyethylene with a specific gravity of less than 0.94, in primary pellet form, with ethylene content exceeding 95% by weight.
3901.10.00LDPE for Wire Coating Extrusion
LDPE for Wire Coating Extrusion is a specially formulated low-density polyethylene (LDPE) for insulating electrical wires, with good adhesion properties and a density below 0.94. It is classified under tariff item 3901.10.00 as a polyethylene with a specific gravity of less than 0.94, in primary form.
3901.10.00LDPE Injection Molding Grade MI 2.0
LDPE Injection Molding Grade MI 2.0 is a low-density polyethylene (LDPE) in pellet form for injection molding applications such as bottle caps, with a melt index of 2.0 and a density of 0.925. It is classified under tariff item 3901.10.00 as a polyethylene with a specific gravity of less than 0.94, in primary form.
3901.10.00Low-Density Polyethylene LDPE 0250 Resin
Low-Density Polyethylene LDPE 0250 is a low-density polyethylene resin with a specific gravity of 0.925, produced via high-pressure polymerization. It is supplied in primary pellet form, and its ethylene monomer content exceeds 95% by weight, classifying it under this tariff item.
3901.10.00Low Density Polyethylene LDPE 1442 Resin for Film Extrusion
Low Density Polyethylene LDPE 1442 is a low-density polyethylene resin with a relative viscosity of 1.48 and specific gravity of 0.919, optimized for blown film production. It is supplied in primary pellet form, and its ethylene monomer content exceeds 95% by weight, classifying it under this tariff item.
3901.10.00Low Density Polyethylene Resin LDPE 0025
Low Density Polyethylene Resin LDPE 0025 is a standard low-density polyethylene (LDPE) resin with a melt index of 25 g/10 min and a specific gravity below 0.94, excluding linear variants. It is classified under tariff item 3901.10.00 as a polyethylene with a specific gravity of less than 0.94, in primary form, where ethylene constitutes 95% or more by weight.
3901.10.00Lupolen 3020D MDPE Pellets
Lupolen 3020D medium-density polyethylene homopolymer in granular form, optimized for blow molding and film extrusion with a density of 0.931 g/cm³. As a primary-form polymer with ethylene content above 95% by weight and specific gravity below 0.94, it falls under tariff item 3901.10.00.
3901.10.00LyondellBasell Icorene MDPE 1005
LyondellBasell Icorene MDPE 1005 recycled medium-density polyethylene pellets for rotomolding, with a density of 0.935 g/cm³. This primary-form ethylene polymer has a specific gravity below 0.94 and predominant ethylene content, placing it under tariff item 3901.10.00.
3901.10.00LyondellBasell LLDPE 118N Pellets
LyondellBasell LLDPE 118N is a hexene-based linear low-density polyethylene (LLDPE) resin in pellet form, with a specific gravity of 0.918 and ethylene content exceeding 95% by weight. It is classified under tariff item 3901.10.00 as a polyethylene with a specific gravity of less than 0.94, in primary form.
3901.10.00Marlex HHM TR-144 MDPE Granules
Marlex HHM TR-144 medium-density polyethylene granules for gas pipe applications, with a density of 0.934–0.938 and high stress crack resistance. The product is an ethylene polymer in primary form with specific gravity below 0.94, classified under tariff item 3901.10.00.
3901.10.00Marlex LDPE HHM TR-130 Pellets
Marlex LDPE HHM TR-130 is a low-density polyethylene resin with a specific gravity of 0.926, used for trash bag and liner production. It is supplied in primary pellet form, and its ethylene monomer content exceeds 95% by weight, classifying it under this tariff item.
3901.10.00Marlex LLDPE 0202HN Linear Low Density Polyethylene Resin
Marlex LLDPE 0202HN is a linear low-density polyethylene (LLDPE) resin with a specific gravity below 0.94, produced by copolymerization of ethylene with butene-1. It is classified under tariff item 3901.10.00 as a polyethylene with a specific gravity of less than 0.94, in primary pellet form.
3901.10.00Medical Grade HMWPE Resin MG-1480 for Orthopedic Devices
Medical Grade HMWPE Resin MG-1480 is a high molecular weight polyethylene resin with a relative viscosity of 1.52 and specific gravity of 0.928, supplied in sterilized primary pellets. It is used for orthopedic implant production, and its ethylene monomer content exceeds 95% by weight, falling under this tariff item.
3901.10.00Medium Density Polyethylene Resin MDPE 2400
Medium-density polyethylene resin with a specific gravity between 0.926 and 0.940, supplied in pellet form for extrusion and molding applications. This primary-form polymer, with ethylene monomer content exceeding 95% by weight, falls under tariff item 3901.10.00 for polyethylene below 0.94 specific gravity.
3901.10.00Narrow MWD LDPE for Medical Packaging
Narrow molecular weight distribution low-density polyethylene (LDPE) resin in primary form, specifically designed for sterile medical packaging films. The material has a specific gravity below 0.94 and is composed of ethylene monomer units exceeding 95% by weight, meeting the tariff item's requirements for polyethylene of this density.
3901.10.00Petrothene NA 202 Rotomolding Powder
Petrothene NA 202 is a low-density polyethylene powder with a specific gravity of 0.930, used for rotational molding of tanks and playground equipment. It is supplied in primary form (powder), and its ethylene monomer content exceeds 95% by weight, classifying it under this tariff item.
3901.10.00Polyethylene LX200 Extrusion Grade
Polyethylene LX200 Extrusion Grade is a general-purpose low-density polyethylene (LDPE) resin in primary pellet form, with a specific gravity of 0.923. It is used for extrusion coating and pipe applications. It falls under tariff item 3901.10.00 because it is a polyethylene with a specific gravity below 0.94, and the ethylene monomer content exceeds 95% by weight.
3901.10.00Resin PE-LD 2420H Extrusion Pellets
Resin PE-LD 2420H is a heavy-duty low-density polyethylene (LDPE) in pellet form, with a specific gravity of 0.924, used for thick film extrusion such as shrink wrap. It is classified under tariff item 3901.10.00 because it is a polyethylene with a specific gravity below 0.94 and the ethylene monomer content exceeds 95% by weight.
3901.10.00Rotomolding Grade Polyethylene RES-1445 UHMW
Rotomolding Grade Polyethylene RES-1445 UHMW is an ultra-high molecular weight polyethylene supplied as powder or granules with a relative viscosity of 1.60 and specific gravity of 0.930. It is used for rotational molding of industrial containers, and its ethylene monomer content exceeds 95% by weight, classifying it under this tariff item.
3901.10.00SABIC LLDPE R50035 Pellets
SABIC LLDPE R50035 is a butene comonomer linear low-density polyethylene (LLDPE) with a specific gravity of 0.918 and ethylene monomers at 96.5% by weight. It is classified under tariff item 3901.10.00 as a polyethylene with a specific gravity of less than 0.94, in primary pellet form.
3901.10.00SABIC MDPE 3810 Film Grade Pellets
SABIC MDPE 3810 pellets for stretch films and liners, with a density of 0.934 g/cm³, in primary form. The product is polyethylene with ethylene constituting 95% or more by weight and specific gravity below 0.94, meeting the tariff item's classification criteria.
3901.10.00Standard LDPE Pellets 0.923 SG
General-purpose low-density polyethylene (LDPE) pellets with a density of 0.923 g/cm³, intended for various extrusion processes. The product is in primary form, with ethylene monomer content exceeding 95% by weight, and its specific gravity below 0.94 places it squarely within tariff item 3901.10.00.
3901.10.00TotalEnergies Lumicene MDPE M 340080
TotalEnergies Lumicene MDPE M 340080, a metallocene-catalyzed medium-density polyethylene for films with a density of 0.934. This ethylene homopolymer in pellet form has a specific gravity below 0.94 and meets the 95% monomer rule, placing it under tariff item 3901.10.00.
3901.10.00Ultra High Molecular Weight Polyethylene UHMWPE Pellets GUR 4120
Ultra High Molecular Weight Polyethylene UHMWPE Pellets GUR 4120 are supplied in primary pellet form with a relative viscosity of 1.65 and specific gravity below 0.94. They are designed for rotational molding of large containers and tanks, and their ethylene monomer content exceeds 95% by weight, falling under this tariff item.