IFO 180 Heavy Marine Fuel
IFO 180 is a blended intermediate fuel oil used in marine engines, combining residual and distillate fractions with a biodiesel component. It contains more than 70% by weight of petroleum oils, which are the basic constituents, and is not a waste oil. It is classified under tariff item 2710.20.90 because it is a petroleum preparation containing biodiesel, other than lubricating oils put up for retail sale.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the fuel does not contain biodiesel
Petroleum oils and preparations without biodiesel are classified under this residual heading.
If the product is put up in packings for retail sale as a lubricating oil
Lubricating oils containing biodiesel and packaged for retail sale are specifically classified under this sibling item.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the biodiesel content is clearly documented, as the classification depends on the presence of biodiesel
• Verify that the product is not considered a waste oil under Chapter 27 Note 3, which would change the tariff classification
• Consult the CBSA's D10 database for the current Most-Favoured-Nation duty rate, as it may be subject to change
Related Products under Tariff item 2710.20.90
B20 Biodiesel Highway Diesel
B20 biodiesel highway diesel is a blend of 20% biodiesel and 80% petroleum diesel, used in on-road vehicles. It has an API gravity over 25 degrees, indicating a light distillate fuel. This product is classified under tariff item 2710.20.90 as a petroleum preparation containing biodiesel, other than waste oils or retail-packaged lubricants.
B20 Diesel Biodiesel Blend Low Sulfur
A blend of 20% biodiesel (B20) with No. 2 diesel fuel, containing 30 ppm sulfur and meeting light fuel oil specifications. With over 70% petroleum oils and biodiesel as a basic constituent, this product is classified under tariff item 2710.20.90 as a preparation containing biodiesel.
B5 Biodiesel Blend Diesel Fuel
A No. 2 diesel fuel blended with 5% biodiesel (B5), with sulfur content ranging from 20 to 400 ppm and light fuel oil properties. This preparation contains over 70% petroleum oils with biodiesel as a constituent, placing it under tariff item 2710.20.90.
B5 Biodiesel Blend Heating Oil
B5 biodiesel blend heating oil combines 5% biodiesel with 95% petroleum distillate for residential and commercial heating. It has an API gravity exceeding 25 degrees, indicating a light fuel oil. This product is classified under tariff item 2710.20.90 as a petroleum preparation containing biodiesel, other than waste oils or retail-packaged lubricants.
Biodiesel-Blended No. 4 Fuel Oil
No. 4-type fuel oil containing biodiesel (mono-alkyl esters) with over 70% petroleum oils, viscosity 45-125 SUS at 37.8°C, and API gravity below 25 degrees. This product is a preparation of heading 27.10 with biodiesel, not waste oil, used for low-emission industrial burners.
Biodiesel-Blended ULSD #2 (15 ppm Sulfur)
A blend of petroleum-derived Diesel #2 and biodiesel (mono-alkyl esters), with sulfur content limited to 15 ppm for clean combustion in highway vehicles. This preparation contains 70% or more petroleum oils by weight, with biodiesel as a key constituent, and is not waste oil, placing it under tariff item 2710.20.90.