Other Note: The General Tariff rate that applies to goods of this tariff item is the Most-Favoured-Nation Tariff rate.
Molybdenum ores and concentrates. > Other > Other: > Other Note: The General Tariff rate that applies to goods of this tariff item is the Most-Favoured-Nation Tariff rate. > Other Note: The General Tariff rate that applies to goods of this tariff item is the Most-Favoured-Nation Tariff rate.
Duty Rate (from China)
Subheadings
Products classified under Tariff item 2710.20
B20 Biodiesel Highway Diesel
B20 biodiesel highway diesel is a blend of 20% biodiesel (mono-alkyl esters of fatty acids) and 80% petroleum diesel, with an API gravity over 25 degrees. It is a light distillate fuel oil containing biodiesel, not waste oil, and is put up in packings for retail sale, such as drums or cans for consumers.
2710.20.10B20 Diesel Biodiesel Blend Low Sulfur
B20 diesel biodiesel blend low sulfur is a 20% biodiesel blend with No. 2 diesel fuel, containing 30 ppm sulfur, viscosity under 45 SUS, and API gravity above 25 degrees. It is a light fuel oil containing biodiesel, put up in retail packings for fleet vehicles.
2710.20.10B5 Biodiesel Blend Diesel Fuel
B5 biodiesel blend diesel fuel is a No. 2 diesel fuel blended with 5% biodiesel, with sulfur content of 20-400 ppm, API gravity above 25 degrees, and viscosity under 45 SUS. It is a light fuel oil containing biodiesel, packaged for retail sale in containers like drums.
2710.20.10B5 Biodiesel Blend Heating Oil
B5 biodiesel blend heating oil is a mixture of 5% biodiesel and 95% petroleum distillate, with an API gravity exceeding 25 degrees. It is a light fuel oil containing biodiesel, used for residential and commercial heating, and is packaged for retail sale in containers like jugs or drums.
2710.20.10Biodiesel-Blended ULSD #2 (15 ppm Sulfur)
Biodiesel-blended ULSD #2 with 15 ppm sulfur is a preparation of petroleum-derived Diesel #2 blended with biodiesel, limited to 15 ppm sulfur for clean combustion in trucks and cars. It is a light fuel oil containing biodiesel, packaged for retail sale in containers like drums or cans.
2710.20.10Heating Oil No. 2 with Biodiesel
Heating oil No. 2 with biodiesel is a No. 2 heating oil blended with biodiesel, with sulfur content of 100 ppm, API gravity of 28-35 degrees, and viscosity under 45 SUS. It is a light fuel oil containing biodiesel, put up in retail packings for residential and commercial boilers.
2710.20.10Highway Ultra-Low Sulfur Diesel (≤15 ppm)
Highway ultra-low sulfur diesel with 15 ppm or less sulfur is a premium diesel for on-highway vehicles, refined with biodiesel admixture for better lubricity and emissions. It is a light fuel oil containing biodiesel, put up in retail packings for sale to consumers.
2710.20.10Industrial Furnace Oil No. 2 Grade
Industrial furnace oil No. 2 grade is a distillate fuel oil blended with biodiesel, with an API gravity of 28-35 degrees. It is a light fuel oil containing biodiesel, used in manufacturing boilers, and is put up in retail packings such as drums for end users.
2710.20.10Kerosene Fuel Oil Blend
Kerosene fuel oil blend is a biodiesel-blended kerosene-grade distillate used for industrial burners and turbines, with an API gravity above 25 degrees. It is a light fuel oil containing biodiesel, packaged for retail sale in containers like cans or drums.
2710.20.10Low-Sulfur Diesel Fuel Oil No. 2
Low-sulfur diesel fuel oil No. 2 is optimized for low emissions with 15 ppm or less sulfur, used in highway diesel engines. It is a light fuel oil containing biodiesel, packaged for retail sale in containers like drums or cans for end users.
2710.20.10Marine Diesel Oil (MDO) Light Blend
Marine diesel oil (MDO) light blend is a light marine diesel oil with biodiesel admixture and API gravity of 25 degrees or more. It is a distillate fuel oil containing biodiesel, used in auxiliary engines, and is put up in retail packings for sale to boat owners.
2710.20.10No. 2 Diesel Fuel
No. 2 diesel fuel is a middle distillate petroleum oil with an API gravity of 30-40 degrees, used for heating and transportation. It is a light fuel oil containing biodiesel, packaged for retail sale in containers like jerry cans or drums for consumers.
2710.20.10Ultra-Low Sulfur Diesel #2 (15 ppm)
Ultra-low sulfur diesel #2 with 15 ppm sulfur is a light distillate fuel oil with an API gravity of 25 degrees or more and a Saybolt Universal viscosity under 45 seconds. It is a light fuel oil containing biodiesel, put up in retail packings for sale to consumers.
2710.20.10Ultra-Low Sulfur Diesel (ULSD)
Ultra-low sulfur diesel (ULSD) is a refined No. 2 diesel with sulfur content under 15 ppm and API gravity of 30-42 degrees, often blended with biodiesel for on-road use. It is a light fuel oil containing biodiesel, put up in retail packings for sale at fuel stations or in containers.
2710.20.10Winterized Low-Sulfur Diesel #2
Winterized low-sulfur diesel #2 is treated for cold weather with pour point depressants, has 15 ppm or less sulfur, and includes biodiesel for on-road use. It is a light fuel oil containing biodiesel, packaged for retail sale in containers like cans or drums.
2710.20.90Biodiesel-Blended No. 4 Fuel Oil
> Biodiesel-blended No. 4 fuel oil contains mono-alkyl esters with over 70% petroleum oils, viscosity 45-125 SUS at 37.8°C, and API below 25°. It is designed for compliant low-emission industrial burners and falls under tariff item 2710.20.90 as a petroleum oil containing biodiesel, not for retail sale.
2710.20.90Blended Biodiesel Heavy Fuel Oil
> Blended biodiesel heavy fuel oil combines residual petroleum oils from bituminous minerals with mono-alkyl fatty acid esters (biodiesel) to reduce emissions. With an API gravity under 25 degrees, it qualifies as a heavy fuel oil under tariff item 2710.20.90, which covers petroleum oils and oils obtained from bituminous minerals containing biodiesel, other than those put up for retail sale.
2710.20.90Blended No. 4 Marine Bunker Fuel
> Blended No. 4 marine bunker fuel is a No. 4-type fuel oil blended for marine bunker use, meeting viscosity 45-125 SUS at 37.8°C and API under 25°. It contains permitted biodiesel and bituminous mineral oils for ship propulsion, falling under tariff item 2710.20.90 as a petroleum oil with biodiesel, other than retail-packed lubricants.
2710.20.90Bunker C Fuel Oil
> Bunker C fuel oil is a high-viscosity residual fuel oil used in marine bunkering and power generation, with an API gravity below 25 degrees. It falls under tariff item 2710.20.90 as a petroleum oil from bituminous minerals containing biodiesel, provided it includes biodiesel and is not packaged for retail sale.
2710.20.90Bunker C Heavy Fuel Oil
> Bunker C heavy fuel oil is a heavy residual fuel oil with high viscosity exceeding 125 Saybolt Universal seconds at 37.8°C, derived from petroleum refining residues. When blended with biodiesel, it falls under tariff item 2710.20.90 as a petroleum oil containing biodiesel, not put up for retail sale.
2710.20.90Heavy Fuel Oil (HFO) Blend with Biodiesel
> Heavy fuel oil blended with biodiesel, with an API gravity under 25 degrees, is designed for industrial furnaces and marine applications where renewable content is mandated. This product falls under tariff item 2710.20.90 as a petroleum oil containing biodiesel, other than retail-packed lubricating oils.
2710.20.90High Viscosity Bunker Fuel (Biodiesel)
> High viscosity bunker fuel blended with biodiesel exceeds 125 SUS at 37.8°C, has API under 25°, and contains petroleum oils as over 70% of basic constituents. It is essential for slow-speed marine engines and falls under tariff item 2710.20.90 as a petroleum oil containing biodiesel, other than retail-packed lubricants.
2710.20.90Industrial Boiler Residual Fuel Oil
> Industrial boiler residual fuel oil is formulated for large industrial boilers, testing under 25° A.P.I., and often blended with biodiesel for emissions compliance. It qualifies under tariff item 2710.20.90 as a petroleum-based residual fuel containing biodiesel, not put up for retail sale.
2710.20.90Industrial No. 4 Heating Oil
> Industrial No. 4 heating oil is a heavy distillate fuel oil for industrial boilers with Saybolt viscosity 45-125 seconds at 37.8°C and API below 25°. It may include biodiesel blends and falls under tariff item 2710.20.90 as a petroleum oil containing biodiesel, not classified as waste oil.
2710.20.90Marine Residual Fuel Oil MGO Blend
> Marine residual fuel oil MGO blend is a biodiesel-blended marine gas oil residual mix with API gravity under 25 degrees, used in auxiliary engines. It falls under tariff item 2710.20.90 as a distillate/residual fuel containing biodiesel from petroleum oils, other than retail-packed lubricants.
2710.20.90No. 4 Fuel Oil (Standard Grade)
> No. 4 fuel oil (standard grade) is a medium-viscosity distillate fuel oil with a Saybolt Universal viscosity at 37.8°C between 45 and 125 seconds, and API gravity under 25 degrees. When blended with biodiesel, it falls under tariff item 2710.20.90 as a petroleum oil containing biodiesel, other than retail-packed lubricating oils.
2710.20.90No. 4-Type Bituminous Fuel Oil
> No. 4-type bituminous fuel oil is derived from bituminous minerals and meets No. 4 specifications: 45-125 SUS at 37.8°C, API under 25°. Used in asphalt plants and heavy machinery, it falls under tariff item 2710.20.90 when containing biodiesel, as a petroleum oil from bituminous minerals, not for retail sale.
2710.20.90No. 6 Fuel Oil
> No. 6 fuel oil is a heavy residual fuel oil derived from petroleum refining, with an API gravity under 25 degrees, used primarily for industrial boilers and large-scale heating systems. It falls under tariff item 2710.20.90 when it contains biodiesel, as a petroleum oil from bituminous minerals, not for retail sale.
2710.20.90Power Plant Grade Fuel Oil
> Power plant grade fuel oil is a low-API heavy fuel oil for electricity generation, incorporating biodiesel and testing below 25° A.P.I. per ASTM standards. It is classified under tariff item 2710.20.90 as a biodiesel-containing residual fuel, other than retail-packed lubricating oils.
2710.20.90Power Plant No. 4 Residual Fuel
> Power plant No. 4 residual fuel is a residual-type No. 4 fuel oil for power generation, with precise 45-125 SUS viscosity at 37.8°C and sub-25° API gravity. Blended from bituminous minerals for high-energy stationary engines, it falls under tariff item 2710.20.90 when containing biodiesel, other than retail-packed lubricating oils.