New

Ask Wove anything about tariffs.

Try Tariff Assistant

ETA 2892-A2 Automatic Watch Movement

The ETA 2892-A2 is a complete, assembled automatic watch movement with 28 jewels, exceeding the 17-jewel threshold for this HTS classification. It features automatic winding via a rotor and is regulated by a balance wheel and hairspring, fitting Chapter 91 definitions for watch movements not over 12mm thick and 50mm wide. Commonly used in mid-range luxury watches for its reliability and precision.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
๐Ÿ‡จ๐Ÿ‡ณChinaFree+20.0%20%
๐Ÿ‡ฒ๐Ÿ‡ฝMexicoFree+10.0%10%
๐Ÿ‡จ๐Ÿ‡ฆCanadaFree+10.0%10%
๐Ÿ‡ฉ๐Ÿ‡ชGermanyFree+10.0%10%
๐Ÿ‡ฏ๐Ÿ‡ตJapanFree+12.5%12.5%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

9108.20Same rate: 20%

If having 17 or fewer jewels

Automatic winding movements with 17 jewels or less fall under the lower jewel count subheading in the same 9108.20 group.

8483.60.40Higher: 52.8% vs 20%

If suitable for other precision instruments

Chapter notes specify movements usable in clocks/watches or other articles stay in Chapter 91, but if primarily for non-timekeeping instruments, they shift to Chapter 84.

8504.10.00.00Higher: 23% vs 20%

If not yet assembled into complete movement

Unassembled components or separate systems not forming a complete watch movement per Chapter 91 definition classify under Chapter 85 ball bearings or transformers.

Not sure which classification is right?

The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code โ€” and can price the duty on it in the same conversation.

Import Tips & Compliance

โ€ข Verify jewel count exceeds 17 and measure dimensions (max 12mm thick, 50mm wide) to confirm HTS 9108.20.40.00 classification

โ€ข Provide technical specs and assembly certification; movements from insular possessions may qualify for duty exemptions under US notes

โ€ข Avoid misclassification as parts; ensure movement is complete and assembled, not unassembled components from Chapter 85