Fangda Carbon Ladle Furnace Electrode 400mm
Graphite electrodes optimized for ladle refining furnaces (LF) in secondary steelmaking, 400mm diameter with low consumption rate of 3.5kg/tc. Features high thermal shock resistance for argon stirring operations. HTS 8545.11.00 specifically covers LF furnace applications.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | +35.0% | 35% |
| 🇲🇽Mexico | Free | +10.0% | 10% |
| 🇨🇦Canada | Free | +10.0% | 10% |
| 🇩🇪Germany | Free | +10.0% | 10% |
| 🇯🇵Japan | Free | +10.0% | 10% |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If brush-grade carbon for motor applications
Carbon brushes/products for electrical machines/motors classified separately from furnace electrodes.
If petroleum coke needle coke feedstock, not finished electrodes
Raw petroleum coke or calcined needle coke classified under mineral fuels, not fabricated electrodes.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Distinguish LF electrodes from EAF by declaring lower current capacity (15-20kA vs 40kA+); affects classification
• Provide ash content (<0.3%) and flexural strength (>10MPa) test reports; critical for furnace electrode verification
Related Products under HTS 8545.11.00
GrafTech High-Purity Graphite Furnace Electrode
High-purity graphite electrodes designed specifically for electric arc furnaces (EAF) used in steel production. These electrodes carry high electrical current to generate arc heat for melting scrap metal, featuring diameters from 300-700mm and ultra-high power (UHP) grades. Classified under HTS 8545.11.00 as carbon electrodes of a kind used for furnaces.
Showa Denko UHP Graphite Electrode RP 500mm
Regular Power (RP) grade graphite electrode, 500mm diameter x 1800-2400mm length, with 4TPL threaded nipple for EAF steelmaking. Provides stable arc performance with current load capacity of 22,000-28,000A. Meets HTS 8545.11.00 criteria for furnace electrodes.
Kaifeng Carbon HP Electrode 600mm for EAF
High Power (HP) graphite electrode 600mm diameter for electric arc furnaces, with current density up to 18A/cm². Includes male/female nipple connections for column assembly up to 9m height. Precisely matches HTS 8545.11.00 furnace electrode definition.
Tokai Carbon Ultra-High Power Electrode 700mm
UHP graphite electrode 700mm diameter for ultra-high power electric arc furnaces producing high-quality alloy steel. Features advanced needle coke formulation with consumption rate <2.2kg/tc. HTS 8545.11.00 classification confirmed by EAF-specific design.
Heguang Carbon Electrode Column Assembly
Pre-assembled graphite electrode column consisting of three 500mm electrodes connected via 4TPL nipples, total height 7.2m for continuous EAF operation. Factory-assembled to ensure perfect joint conductivity. Classifies under HTS 8545.11.00 as furnace electrodes.