Graphite Furnace Electrode 400mm Diameter
High-purity graphite electrode measuring 400 mm in diameter, designed for use in electric arc furnaces for steel production. It conducts electricity to generate the arc heat needed for melting scrap metal. Classified under HTS 8545.11.0010 due to its graphite composition and diameter not exceeding 425 mm for furnace applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If diameter exceeds 425 mm but not over 525 mm
Larger diameter graphite electrodes for furnaces fall into the next size-based subheading in the same tariff structure.
If not specifically for furnace use
Graphite electrodes for other electrical purposes like electrolysis move out of the furnace-specific subheading.
If primarily non-conductive or shaped articles
Articles of graphite not primarily for electrical conduction are classified under other articles of stone/graphite.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify electrode diameter does not exceed 425 mm with precise measurements to avoid reclassification to larger size subheadings
• Obtain certificates of graphite purity and intended furnace use to support electrical purpose classification
• Check for metal impregnation levels as excessive metal content may shift to other carbon article subheadings
Related Products under HTS 8545.11.00.10
Graphite Arc Furnace Electrode Set 380mm
Set of three 380 mm graphite electrodes with nipples for complete electric arc furnace column replacement. Designed for quick installation in steel plants. HTS 8545.11.0010 applies as individual graphite furnace electrodes qualify by size, even when set-packed.
UHP Graphite Electrode 350mm for EAF
Ultra High Power (UHP) graphite electrode, 350 mm diameter, with low electrical resistivity for electric arc furnaces in steelmaking. Features high thermal shock resistance and mechanical strength. Fits HTS 8545.11.0010 as a furnace electrode of graphite under 425 mm diameter.
RP Graphite Electrode 300mm Diameter
Regular Power (RP) graphite electrode of 300 mm diameter for use in submerged arc furnaces and ladle furnaces. Provides stable arc and good thermal conductivity. HTS 8545.11.0010 applies to its graphite material and furnace electrode function under 425 mm size limit.
Graphite Electrode with Copper Alloy Nipple 380mm
380 mm diameter graphite electrode fitted with copper alloy connecting nipple for jointing in electric arc furnace operations. The metal nipple facilitates electrical and mechanical connection. Remains under HTS 8545.11.0010 as graphite electrode with metal for furnaces ≤425 mm.
HP Graphite Electrode 420mm for Steel Melting
High Power (HP) graphite electrode, 420 mm diameter, optimized for steel melting in AC electric arc furnaces with superior oxidation resistance. Meets strict consumption rate specs for high-current operations. HTS 8545.11.0010 due to graphite construction, furnace purpose, and size constraint.
Semi-Graphite Electrode 250mm for Ferroalloy Furnace
Semi-graphite electrode of 250 mm diameter for ferroalloy production furnaces, offering cost-effective performance with good conductivity. Used in submerged arc furnaces for silicon-manganese smelting. Classifies to HTS 8545.11.0010 as carbon/graphite furnace electrode under size limit.