C-Band Marine Radar Solid-State Amplifier

Solid-state C-band (4-8 GHz) amplifier for commercial marine navigation radars, 25 kW peak power with pulse compression. HTS 8543.70.80.00 for microwave amplification in maritime safety systems. Enables collision avoidance and navigation in poor visibility conditions.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
πŸ‡¨πŸ‡³ChinaFree+35.0%35%
πŸ‡²πŸ‡½MexicoFree+10.0%10%
πŸ‡¨πŸ‡¦CanadaFree+10.0%10%
πŸ‡©πŸ‡ͺGermanyFree+10.0%10%
πŸ‡―πŸ‡΅JapanFree+10.0%10%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

8526.91.00Same rate: 35%

If integral to complete marine radar

Amplifiers designed for specific radar models classified under radar apparatus heading.

8908.00.00Same rate: 35%

If as vessel parts

Marine navigation equipment permanently installed on vessels classified as vessel parts.

8519Lower: 10% vs 35%

If sound-signaling integration

Radar amps with integrated AIS or sounders may classify under nautical signaling apparatus.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

β€’ IMO/SOLAS type approval documentation mandatory; specify IP67 waterproof ratings

β€’ Marine radars require pulse compression verification

β€’ Coastal installations need frequency coordination

Related Products under HTS 8543.70.80.00

GaN Solid-State Power Amplifier SSPA-100W

A gallium nitride (GaN) based solid-state microwave amplifier delivering 100W output power in the 2-6 GHz frequency range, used in radar systems and satellite communications. It falls under HTS 8543.70.80.00 as a microwave amplifier, which boosts microwave frequency signals for transmission applications. These devices operate on principles of amplifying signals above 300 MHz in the microwave spectrum.

Traveling Wave Tube Amplifier TWTA-40GHz

A high-power traveling wave tube (TWT) microwave amplifier operating at 40 GHz with 200W output, essential for satellite uplinks and deep-space communications. Classified under HTS 8543.70.80.00 for its function as a microwave signal amplifier using vacuum tube technology. It amplifies weak microwave signals to high power levels for long-distance transmission.

Low Noise Block Amplifier LNB Ku-Band

A Ku-band (11-14 GHz) low noise block downconverter amplifier used in satellite TV reception systems to amplify weak satellite signals. Falls under HTS 8543.70.80.00 as a specialized microwave amplifier despite its downconversion function, due to primary amplification role. It converts and amplifies satellite microwave signals for consumer dish antennas.

MMIC Microwave Monolithic Integrated Circuit Amplifier

A GaAs MMIC amplifier chip operating 8-12 GHz with 20 dB gain, used in phased array radar and 5G mmWave systems. HTS 8543.70.80.00 covers this as a microwave amplifier IC, distinct from general semiconductor devices. It provides compact, high-frequency signal amplification for modern RF applications.

X-Band Pulsed Radar Amplifier Module

Modular solid-state amplifier for X-band (8-12 GHz) pulsed radar applications, delivering 50 kW peak power for military and weather radar systems. Classified under HTS 8543.70.80.00 for microwave amplification function in pulsed operation mode. Essential for high-resolution radar target detection and tracking.

Ka-Band Satellite Uplink Power Amplifier

High-power Ka-band (26-40 GHz) SSPA for satellite communication earth stations, providing 100W linear power for broadband internet backhaul. HTS 8543.70.80.00 applies to this microwave amplifier used in satellite transmission links. Supports high-data-rate satellite communications with low distortion amplification.