Electric Blanket Heating Wire

Thin twin-conductor resistance wire with PTFE insulation for mattress pads and throws, thermostatically controlled. Under HTS 8516.80.8000 as domestic heating resistor; 50-100W full-size output.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳ChinaFree+35.0%35%
🇲🇽MexicoFree+10.0%10%
🇨🇦CanadaFree+10.0%10%
🇩🇪GermanyFree+10.0%10%
🇯🇵JapanFree+10.0%10%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

8516.90Lower: 13.9% vs 35%

If pre-woven into complete blanket fabric assembly

Complete electrothermic bedding classified as finished appliance parts.

5402.59.01.00Higher: 43% vs 35%

If textile yarn without electrical function

Plain synthetic yarn for blankets is Chapter 54 textiles.

9404.90Lower: 17.3% vs 35%

If permanently installed in mattress manufacture

Mattress parts with integral heating shift to Chapter 94 furniture.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

Comply with CPSC requirements for bedding flammability; test wire flexibility after 10,000 flex cycles; declare controller disconnect temperature

Related Products under HTS 8516.80.80.00

Mica Band Heater Resistor

A flat, flexible electric heating resistor made with mica sheets and nichrome wire, designed for band heaters used to maintain temperature in industrial plastic molding barrels. It falls under HTS 8516.80.8000 as an electric heating resistor for domestic or general use, distinct from specialized resistors in heading 8545. Typical resistance values range from 10-100 ohms depending on voltage.

3D Printer Heated Bed Resistor

PCB-mounted serpentine trace resistor heating aluminum bed to 110°C for FDM 3D printing adhesion. HTS 8516.80.8000 as other heating resistor for domestic hobby use; 24V DC, 200W typical.

Tubular Sheathed Heating Element

Sealed metal tube containing a coiled resistance wire in magnesium oxide insulation, used in domestic ovens, grills, and water heaters. Classified under HTS 8516.80.8000 as 'other' electric heating resistors for domestic electrothermic appliances, not fixed resistors of 8545. Common lengths 12-48 inches with 1000-5000W ratings.

Open Coil Nichrome Heater Wire

Exposed nichrome resistance wire coiled for convective heating in toasters, convection ovens, and space heaters for home use. HTS 8516.80.8000 covers these as other electric heating resistors for domestic purposes, excluding semiconductor or carbon film types in 8545. Operates at 1000-1500°C surface temperature.

PTC Thermistor Heating Resistor

Positive temperature coefficient ceramic disc that self-regulates heat output, used in hair straighteners, coffee makers, and automotive seat heaters. Under HTS 8516.80.8000 as other domestic heating resistors; PTCs increase resistance with temperature unlike fixed resistors of 8545. Self-limits to 240°C preventing overheating.

Silicone Rubber Flexible Heater

Thin etched-foil resistance circuit laminated between silicone rubber sheets for drum heaters, laboratory hot plates, and medical warming pads. HTS 8516.80.8000 for other domestic electrothermic heating resistors; flexible design conforms to curved surfaces up to 200°C.