250 kVA Data Center Power Transformer
Cast resin transformer for data center electrical rooms, 13.8 kV to 480V at 250 kVA with high efficiency design. Falls under HTS 8504.33.00 for 16-500 kVA power transformers.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If over 500 kVA for large facilities
Hyperscale data center transformers exceed capacity limit.
If special audio isolation design
Low-noise transformers for recording studios have separate classification.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Tier III/IV certification documentation for data center reliability
• Partial discharge test results (<10 pC) for cast resin verification
• Fire point rating documentation for resin insulation system
Related Products under HTS 8504.33.00
30 kVA Pad-Mounted Distribution Transformer
This oil-immersed pad-mounted transformer is designed for outdoor utility distribution, stepping down medium voltage to 240/480V for residential and commercial use. It falls under HTS 8504.33.00 due to its 30 kVA power handling capacity, which exceeds 16 kVA but does not exceed 500 kVA, classifying it as a power transformer without additional conversion functions.
50 kVA Three-Phase Pole-Mounted Transformer
A three-phase pole-mounted transformer for overhead distribution lines, converting 13.8 kV to 208Y/120V service voltage. Classified under HTS 8504.33.00 for its 50 kVA capacity within the 16-500 kVA range, typical for medium-sized commercial power delivery.
100 kVA Dry-Type Cast Coil Transformer
Epoxy cast coil dry-type transformer for indoor industrial applications, handling 480V delta to 208Y/120V with 100 kVA capacity. HTS 8504.33.00 applies as a power transformer in the specified 16-500 kVA range, without static conversion features.
25 kVA Single-Phase Farm Duty Transformer
Single-phase transformer designed for rural agricultural service drops, typically 7.2 kV to 240/120V at 25 kVA. Falls under HTS 8504.33.00 for medium power handling between 16-500 kVA, standard for farm distribution.
150 kVA Oil-Filled Substation Transformer
Three-phase oil-immersed transformer for pad-mounted substations, 12.47 kV to 480V at 150 kVA capacity. HTS 8504.33.00 classification based on power handling specs within the 16-500 kVA threshold.
40 kVA Ventilation-Enclosed Transformer
Dry-type transformer with ventilated NEMA 2 enclosure for commercial HVAC applications, 600V to 208V at 40 kVA. Classified in HTS 8504.33.00 for its medium power rating suitable for building electrical systems.