RAID Controller PCIe Card

PCIe-based RAID storage controller card supporting up to 12 drives with hardware RAID levels 0/1/5/6/10. HTS 8471.70.60.00 for non-cabinet storage units in ADP machines. Enhances server storage redundancy.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳ChinaFree+50.0%50%
🇲🇽MexicoFree+25.0%25%
🇨🇦CanadaFree+25.0%25%
🇩🇪GermanyFree+15.0%15%
🇯🇵JapanFree+15.0%15%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

8471.70.50Same rate: 50%

If in rackmount controller enclosures

Enclosed controllers for floor placement treated as assembled.

8517.62.00Lower: 32.5% vs 50%

If with integrated network switching

Network-attached storage controllers go to machines for data reception.

8473.30Lower: 35% vs 50%

If as general ADP printed circuits

Boards without specific storage function classified as parts.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

Provide RAID level certifications and server compatibility lists for documentation

Classify distinctly from onboard motherboard RAID to qualify as dedicated storage unit

Related Products under HTS 8471.70.60.00

Enterprise SAS Hard Disk Drive

A 12TB SAS interface hard disk drive designed for high-performance server storage, featuring 7200 RPM speed and dual-port redundancy. Classified under HTS 8471.70.60.00 as a storage unit for automatic data processing machines, not assembled in cabinets for table, desk, wall, floor, or similar placement. It lacks an enclosure suitable for standalone consumer use.

NVMe SSD PCIe Card

A high-speed NVMe solid-state drive mounted on a PCIe add-in card for direct server motherboard installation. Falls under HTS 8471.70.60.00 as an unassembled storage unit for data processing machines, without cabinet housing. Optimized for enterprise workloads with capacities up to 30TB.

Server Rackmount HDD Tray

Hot-swappable hard disk drive carrier tray for 2.5-inch or 3.5-inch drives in data center rack servers. HTS 8471.70.60.00 applies as a non-cabinet storage unit component for ADP systems. Designed for bulk installation without standalone housing.

Fibre Channel HBA Storage Controller

Host bus adapter card providing Fibre Channel interface for connecting enterprise storage arrays to servers. Classified in HTS 8471.70.60.00 as a storage unit for data processing, not in table/desk cabinet form. Enables high-speed SAN connectivity.

High-Capacity 2.5-inch Enterprise SSD

2.5-inch form factor solid-state drive with 15.36TB capacity, U.2 interface for server backplanes. Under HTS 8471.70.60.00 as non-assembled storage unit lacking cabinet for placement. Built for 24/7 data center operations.

SATA Backplane Board

Multi-drive SATA backplane circuit board for server chassis, supporting 24 hot-swap bays. Fits HTS 8471.70.60.00 as storage unit component, not for standalone cabinet placement. Facilitates dense server storage.