Other, valued under $3,025 each
Machine tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excluding drawbenches); presses for working metal or metal carbides, not specified above: > Cold metal working presses: > Other: > Other > Other, valued under $3,025 each
Duty Rate (from China)
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Except as provided in headings 9903.88.05, 9903.88.06, 9903.88.07, 9903.88.08, 9903.88.10, 9903.88.11, 9903.88.14, 9903.88.19, 9903.88.50, 9903.88.52, 9903.88.58, 9903.88.60, 9903.88.62, 9903.88.66, 9903.88.67, 9903.88.68, or 9903.88.69, articles the product of China, as provided for in U.S. note 20(a) to this subchapter and as provided for in the subheadings enumerated in U.S. note 20(b) [to this subchapter]
Products classified under HTS 8462.69.80.20
Hydraulic Benchtop Metal Punch Press
A compact hydraulic press designed for punching holes in sheet metal up to 1/4 inch thick, suitable for small workshops and fabrication tasks. Classified under HTS 8462.69.8020 as a cold metal working press valued under $3,025 each, used for punching operations on metal sheets. It features adjustable stroke length and a 10-ton pressing force.
Manual Arbor Punch Press
A foot-operated arbor press for notching and punching precise holes in thin metal sheets, ideal for jewelry making and small repairs. Falls under HTS 8462.69.8020 as an other cold metal working press valued under $3,025, performing punching and notching without power drive. Capacity up to 3 tons with quick-change tooling.
Electric Shearing Machine for Metal Sheets
Portable electric guillotine shear for straight cuts on mild steel sheets up to 16 gauge, used in HVAC ductwork fabrication. HTS 8462.69.8020 covers this as other cold metal working shear press under $3,025 value. Features 24-inch cutting length and foot pedal control.
Benchtop Hydraulic Notching Press
Hydraulic press specialized for 90-degree notching in square metal tubing for railings and frames. Under HTS 8462.69.8020 as cold metalworking notching press valued below $3,025. 20-ton force with adjustable dies for 2x2 inch tubing.
Mini C-Frame Press for Metal Flattening
Small C-frame pneumatic press for straightening and flattening bent metal brackets and parts. HTS 8462.69.8020 applies to this cold-working straightening press under $3,025 value. 5-ton capacity with precision ram.
Portable Nibbling Machine for Metal
Handheld electric nibbler for contour cutting sheet metal without sparks, used in auto body repair. Classified HTS 8462.69.8020 as cold metal nibbling press under $3,025. Cuts up to 14-gauge steel at 20 strokes/min.
Shop Press for Metal Bending
4-ton manual shop press with V-blocks for bending flat bar and angle iron in garages. Under HTS 8462.69.8020 as other cold metal bending press valued under $3,025. Heavy-duty steel frame for durability.
Air-Operated Metal Straightener Press
Pneumatic straightener for flattening warped steel plates up to 12x24 inches in metal shops. HTS 8462.69.8020 for cold-working straightening presses under $3,025 value. 15-ton air-over-hydraulic system.
Entry-Level Hydraulic Ironworker
Compact hydraulic ironworker combining punch, shear, and notch stations for small fab shops. Valued under $3,025 qualifies for HTS 8462.69.8020 as multifunction cold metalworking press. 22-ton capacity.
Tabletop Metal Folding Press
Manual lever-operated folder for bending sheet metal hems and seams up to 30 inches wide. HTS 8462.69.8020 covers this cold metal folding press under $3,025. 18-gauge capacity.
Budget Pneumatic Punch Press
Air-powered single-station punch press for production hole punching in metal enclosures. Under $3,025 value fits HTS 8462.69.8020 cold metalworking press. 8-ton force, 4-inch throat.
Hand-Fed Metal Shearing Press
Lever-operated swing beam shear for cutting metal strips in craft and prototype work. HTS 8462.69.8020 for cold shearing presses under $3,025. 36-inch blade length.
Compact Die Flanging Press
Hydraulic flanging press for forming flanges on sheet metal ducting and pans. Valued <$3,025 under HTS 8462.69.8020 as cold metalworking press. 12-ton, uses standard tooling.
DIY Garage Metal Bender Press
Ratchet-operated bender press for structural steel angle and flat stock in home workshops. HTS 8462.69.8020 applies to this cold bending press under $3,025. 90-degree bend capacity.
Entry Hydraulic Broaching Press
Small hydraulic pull-broaching press for keyways in metal shafts and gears. Under HTS 8462.69.8020 as specialized cold metalworking press <$3,025. 10-ton pull force.