Cast Iron Turbine Casing for Civil Aircraft Gas Turbine
A rough-machined cast iron housing that encases the turbine blades and rotor in civil aircraft gas turbines. It is cast iron, advanced only to cleaning and minimal machining for fin removal and location, aligning with HTS 8411.99.1040 for parts of aircraft gas turbines used in civil aircraft.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If further machined or advanced beyond cleaning
Parts machined beyond removal of fins/gates fall under other machined parts, not limited to cleaning only.
If imported as general cast iron castings without aircraft specification
Unspecified cast iron products for aircraft engines revert to Chapter 73 iron/steel castings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify FAA or EASA certification for civil aircraft compatibility to avoid reclassification
• Provide detailed engineering drawings showing minimal machining beyond cleaning to confirm eligibility
Related Products under HTS 8411.99.10.40
Cast Iron Compressor Housing for Boeing 737 Gas Turbine
Rough cast iron stator housing for the compressor section of civil aircraft gas turbines like those in Boeing 737. Cleaned and lightly machined only for casting imperfections and fixturing, fitting HTS 8411.99.1040 criteria for civil aircraft turbine parts.
Cast Iron Impeller Support Casting for Embraer E-Jets
Cast iron support structure for impellers in gas turbines of Embraer E-Jets civil aircraft. Processed only to remove risers and fins for finishing machinery placement, matching HTS 8411.99.1040.
Cast Iron Diffuser Case for GE90 Civil Turbine
Cast iron diffuser casing that slows airflow post-compressor in GE90 gas turbines for Boeing 777 civil aircraft. Limited processing for fins and sprues, per HTS 8411.99.1040.
Cast Iron Fan Frame Casting for Trent 1000 Turbine
Rough cast iron frame supporting the fan section in Rolls-Royce Trent 1000 gas turbines for Boeing 787 civil aircraft. Cleaning and fin removal only, under HTS 8411.99.1040.
Cast Iron Inlet Duct Flange for Airbus A320 Turbine
Cast iron flange connecting the air inlet duct in civil aircraft gas turbine engines such as Airbus A320. Machined solely for gate removal and alignment in finishing equipment, qualifying under HTS 8411.99.1040 for civil aircraft gas turbine parts.
Cast Iron Exhaust Nozzle Base for Civil Jet Engines
Rough-machined cast iron base ring for the exhaust nozzle in civil jet gas turbines. Limited to cleaning and machining for sprue removal, per HTS 8411.99.1040 for parts in civil aircraft.