Unalloyed Tin Sheet 0.5mm Thick
Flat rolled tin sheet made from unalloyed tin with 99.5% purity and thickness of 0.5 mm, used for corrosion-resistant lining in chemical equipment. It falls under HTS 8007.00.20.00 as tin plates, sheets, and strip exceeding 0.2 mm thickness, per chapter definitions for non-alloyed tin. Primarily applied in industrial plating and protective coatings.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If tin content below 99% or alloyed with Bi/Cu over limits
Qualifies as tin alloys per chapter note (b), shifting to alloyed plates/sheets subheading.
If tinned or coated with other metals like steel
Plated steel sheets fall under iron/steel chapter (73), not pure tin articles.
If imported as unwrought bars or ingots
Unwrought tin (not rolled into plates/sheets) classified in unwrought tin heading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify tin purity exceeds 99% with no bismuth or copper over limits via certified mill test reports to confirm unalloyed status
• Measure and document exact thickness (>0.2mm) with caliper readings to avoid reclassification to thinner strips
• Include material safety data sheets (MSDS) for hazardous metal handling during customs inspection
Related Products under HTS 8007.00.20.00
Tin Plate for Solder Manufacturing 0.8mm
Rolled tin plate sheet of 0.8 mm thickness, unalloyed tin grade for melting into soldering foils and wires. Classified under HTS 8007.00.20.00 for tin plates/sheets over 0.2 mm, meeting purity specs in chapter note (a). Essential for electronics and plumbing solder production.
Corrugated Tin Roofing Sheet 1.2mm Thick
Corrugated tin sheet, 1.2 mm thick, unalloyed for durable roofing in harsh climates due to high corrosion resistance. Fits HTS 8007.00.20.00 as tin plates/sheets/strip >0.2 mm; corrugation doesn't change flat-rolled classification. Used in construction for sheds and industrial buildings.
Tin Strip for Chemical Lining 0.3mm
Narrow tin strip, 0.3 mm thick x 50mm wide, unalloyed for lining reactors and pipes against acids. Under HTS 8007.00.20.00 for tin strip exceeding 0.2 mm thickness, per purity definitions. Ideal for pharmaceutical and lab equipment fabrication.
Polished Tin Plate for Decorative Panels 0.6mm
Bright-polished tin plate 0.6 mm thick for architectural decorative panels and signs. HTS 8007.00.20.00 applies to surface-treated tin plates/sheets >0.2 mm, unalloyed tin base. Provides mirror-like finish resistant to tarnish.
Tin Sheet for Battery Anodes 1.0mm
High-purity tin sheet 1.0 mm thick cut for lithium battery anode substrates. Classifies under HTS 8007.00.20.00 as unalloyed tin plates >0.2 mm. Critical for rechargeable battery manufacturing.
Tin Alloy Transition Sheet 0.4mm (Near Alloy Limit)
Tin sheet 0.4 mm thick with 0.39% copper, borderline unalloyed for flexible packaging liners. HTS 8007.00.20.00 if certified under note (a) limits; used in food-safe barriers.