Tin-Lead Fusible Alloy Ingot
Low-melt unwrought ingots of tin alloy containing more than 25% lead, used in fire sprinklers and safety fuses. HTS 8001.20.00.90 covers these as tin-predominant alloys exceeding lead limits in chapter notes.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If lead content under 25% but over other element limits
Other fusible tin alloys use different statistical breaks.
If drawn into wire or rod for sprinklers
Wrought forms for structures classify under iron/steel pipes if applicable.
If parts of fire extinguishers or sprinklers
Finished safety device parts go to Chapter 84.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide melting point specs and composition to distinguish from standard solders
• Comply with NFPA standards documentation for fire safety alloy imports
• Ensure customs entry specifies 'fusible only'; avoids confusion with plumbing solders
Related Products under HTS 8001.20.00.90
Tin-Lead Solder Alloy Ingot
An unwrought ingot composed of tin alloy with over 25% lead content by weight, used primarily for electronics soldering applications. This falls under HTS 8001.20.00.90 as it meets the definition of tin alloys where tin predominates but lead exceeds 25% by weight, distinguishing it from pure tin or low-lead alloys.
Tin-Lead Pewter Alloy Slab
Unwrought slabs of pewter alloy where tin predominates but lead exceeds 25% by weight, used in artisan casting and decorative metalwork. HTS 8001.20.00.90 applies as it fits tin alloy criteria with high lead, excluding lower-lead pewters.
Leaded Tin Type Metal Pigs
Unwrought pigs of stereotype metal alloy (tin base, >25% lead) for printing press type casting. HTS 8001.20.00.90 applies to these legacy high-lead tin alloys in pig form.
Tin-Lead Alloy Master Pellets
Small unwrought pellets of high-lead tin alloy (>25% lead) used as master batches for diluting in foundry melts. Falls under HTS 8001.20.00.90 despite pellet form, as unwrought and meeting alloy specs.
High-Lead Tin Babbitt Metal Bar
Unwrought bars of tin-based babbitt alloy containing more than 25% lead, designed for bearing and machinery lubrication surfaces. Classified under HTS 8001.20.00.90 due to tin predominance with excessive lead per chapter definitions, separate from pure bearing metals.
Leaded Tin Anode Bar
Unwrought tin alloy bars with over 25% lead designed as sacrificial anodes for electroplating and corrosion protection in industrial tanks. Falls under HTS 8001.20.00.90 for high-lead tin alloys in unwrought form, not as finished electrodes.