Zinc Round Rods
Solid cylindrical zinc rods used in machining and manufacturing components for corrosion-resistant applications. Falls under HTS 7904.00.00.00 as zinc rods, not alloyed, with zinc content over 97.5% by weight. Common in plumbing and automotive parts production.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If in wire form with cross-section under key threshold
Thin zinc wire is separated under 7905, while thicker forms remain rods in 7904.
If supplied as zinc dust or powder derivative
Zinc dust from vapor condensation goes to 7903, not solid rod forms.
If fabricated into finished articles like fittings
Completed zinc products move to 7907 or Chapter 76 if not bars/rods.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include chemical analysis reports to confirm non-alloyed status; inspectors often test for alloying elements
• Specify rod diameter and length in documentation to distinguish from wire (under 4.8mm typically)
• Watch for anti-dumping duties on certain zinc products from specific countries; check Commerce updates
Related Products under HTS 7904.00.00.00
Zinc Ingot Bars
Pure zinc ingot bars, typically cast into rectangular shapes for further processing in metalworking industries. Classified under HTS 7904.00.00.00 as zinc bars containing at least 97.5% zinc by weight, not alloyed. Used primarily for die-casting and galvanizing applications.
Zinc Wire 2mm Diameter
Continuous zinc wire with 2mm cross-section for welding and binding in industrial processes. HTS 7904.00.00.00 covers zinc wire forms, not alloyed, meeting purity standards. Used in galvanizing lines and craft applications.
Zinc Flat Bars 10mm Thick
Rectangular flat zinc bars, 10mm thick, for machining into bushings and bearings. Under HTS 7904.00.00.00 as zinc bars, pure non-alloyed zinc. Essential for marine and outdoor hardware.
Zinc Hexagonal Rods
Zinc rods with hexagonal cross-section for precision machining in fasteners. Classified HTS 7904.00.00.00 as zinc rods, adhering to non-alloyed zinc definitions. Popular in DIY and prototyping.
Zinc Profile Strips
Continuous zinc strips with profiled edges for roofing and cladding. HTS 7904.00.00.00 for zinc profiles, pure zinc per chapter note (a). Provides durable weatherproofing.
Pure Zinc Welding Rods
Straight zinc rods designed for welding and brazing non-ferrous metals. Under HTS 7904.00.00.00 as zinc rods, not alloyed with >97.5% zinc. Used in repair and fabrication shops.