Zamac 8 Zinc Alloy Anode Ingots
Zamac 8 ingots for sacrificial anodes in cathodic protection systems, zinc-based alloy unwrought form per HTS 7901.20.00.00 definitions. Provides corrosion protection for marine/offshore structures.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Anode alloys may need galvanic potential test data
• Distinguish from finished electrodes under 8543
• Saltwater exposure certs for performance claims
Related Products under HTS 7901.20.00.00
Zamak 3 Zinc Alloy Ingot
Zamak 3 is a high-pressure die casting zinc alloy containing approximately 96% zinc with aluminum, magnesium, and copper, supplied in unwrought ingot form for melting and casting. It falls under HTS 7901.20.00.00 as a zinc alloy where zinc predominates by weight and other elements exceed 2.5%. Used primarily in automotive and hardware die castings.
Zamak 5 Zinc Alloy Billets
Zamak 5 billets are unwrought forms of a zinc-based die casting alloy with enhanced strength due to higher aluminum and magnesium content, where zinc exceeds other elements by weight. Classified under HTS 7901.20.00.00 per chapter note (b) for zinc alloys. Ideal for precision castings in electronics and appliances.
ZA-8 Zinc-Aluminum Alloy Ingots
ZA-8 is a gravity casting zinc alloy ingot with about 91% zinc, 8% aluminum, and trace elements, provided in unwrought form for foundry use. It qualifies under HTS 7901.20.00.00 as zinc predominates and total other elements >2.5%. Commonly used for heavy-duty bearings and hardware.
ACuZinc 5 Zinc Alloy Pig
ACuZinc 5 pigs are pig-shaped unwrought castings of a zinc-copper-aluminum alloy for die casting, with zinc as the predominant metal per chapter definitions. Classified in HTS 7901.20.00.00 for zinc alloys used in plumbing fixtures and locks.
ZnAl4Cu3 Zinc Alloy Bars
ZnAl4Cu3 unwrought bars are cast zinc alloy stock with 4% aluminum and 3% copper for remelting in foundries, qualifying under HTS 7901.20.00.00 due to zinc predominance. Suitable for corrosion-resistant castings.
Kirksite Zinc Alloy Sheet Stock
Kirksite is a zinc-lead-copper alloy in unwrought sheet stock form for tooling and stretch forming dies, classified under HTS 7901.20.00.00 as zinc predominates. Used in aerospace jigging.