Refined Zinc Billets 99.95%
Unwrought refined zinc billets containing 99.95% zinc, cast for extrusion into wires or sheets. Under HTS 7901.12.50.00 as other unwrought, non-alloyed zinc <99.99%. Satisfies chapter note (a) purity requirements.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If extruded or rolled into bars
Any working beyond casting makes it wrought zinc profiles under 7903.
If alloyed for specific billet applications
Zinc predominating but >2.5% additives per note (b) = alloys in 7901.20.
If ultra-refined to ≥99.99%
Highest purity zinc billets qualify under 7901.11 'other'.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit weight percentage breakdowns; lead/cadmium impurities must not trigger alloy reclass
• For container loads, ensure ventilation to prevent oxidation misread as impurity
Related Products under HTS 7901.12.50.00
Zinc Skim Blocks 99.85%
Refined skim blocks from zinc skimming at 99.85% for general remelt. 7901.12.50.00 for other unwrought non-alloyed zinc. ≥97.5% zinc confirmed.
Zinc Conical Anodes Alternative 99.94% (Non-Anode Use)
Conical zinc castings 99.94% sold for remelt, not anodes. HTS 7901.12.50.00 other unwrought. Non-anode declaration key.
High-Purity Slab Zinc 99.95%
Unwrought zinc in slab form containing 99.95% zinc by weight, produced via electrolysis for use in galvanizing and alloy production. Classified under HTS 7901.12.50.00 as unwrought zinc not alloyed with less than 99.99% zinc purity and not specifically slabs. Meets chapter definition for zinc not alloyed (at least 97.5% zinc).
Electrolytic Zinc Ingots 99.90%
Unwrought zinc ingots at 99.90% purity from electrolytic refining, used in die-casting and chemical manufacturing. Falls under HTS 7901.12.50.00 as 'other' unwrought zinc not alloyed below 99.99% zinc content. Complies with chapter note (a) for non-alloyed zinc.
Zinc Pigs 99.92% Purity
Cast unwrought zinc pigs at 99.92% zinc content from primary smelting, ideal for remelting in galvanizing baths. HTS 7901.12.50.00 covers this as 'other' non-alloyed zinc under 99.99% purity per hierarchy. Aligns with zinc not alloyed definition (≥97.5% zinc).
Zinc Notch Bar 99.93%
Notch-bar form unwrought zinc at 99.93% purity, used in continuous galvanizing lines. Classed in HTS 7901.12.50.00 for other low-purity non-alloyed unwrought zinc. Conforms to chapter's zinc not alloyed specs.