Hard Lead-Antimony Billets 12% Sb
Cylindrical unwrought billets of lead with 12% antimony, designed for cable sheathing and type metal production. Classified in HTS 7801.91.00.00 due to antimony being the chief alloying element, providing essential durability. These are refined, homogeneous forms not yet shaped for specific end-use.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If refined but containing 99%+ lead with negligible alloys
Pure refined lead excludes significant alloying elements like antimony.
If processed into lead sheets or plates
Advances to worked forms like sheets, exiting unwrought category.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill test certificates detailing composition to prevent disputes at customs over antimony percentage
• Ensure packaging prevents oxidation; declare as unwrought to avoid higher duties on semi-manufactured forms
• Check country-of-origin rules; recycled content may trigger additional environmental certifications
Related Products under HTS 7801.91.00.00
Antimonial Lead Ingot 10% Sb
Unwrought lead ingot alloyed with 10% antimony by weight, used primarily in battery manufacturing for improved hardness and corrosion resistance. This falls under HTS 7801.91.00.00 because antimony is the principal other element by weight, exceeding 99% lead content threshold for pure lead. It is supplied in large, cast form suitable for remelting.
Battery-Grade Antimony Lead Pigs 8% Sb
Cast pig forms of unwrought lead alloy containing 8% antimony by weight, optimized for lead-acid battery grids. HTS 7801.91.00.00 applies as antimony is the principal other element, enhancing grid strength. Supplied in bulk for foundry remelting without further refinement.
Type Metal Lead-Antimony Bars 15% Sb
Rectangular unwrought bars of lead with 15% antimony, traditional for printing type casting due to low shrinkage. This product is under HTS 7801.91.00.00 with antimony as the main alloy component. Bars are cast directly from molten alloy for easy handling.
Corrosion-Resistant Lead-Antimony Slabs 11% Sb
Flat unwrought slabs of lead alloyed with 11% antimony for chemical plant linings and acid-resistant applications. HTS 7801.91.00.00 covers this as antimony is the primary other element by weight. Slabs are rough-cast for subsequent fabrication.
Solder-Grade Antimony Lead Anodes 9% Sb
Unwrought anode forms of lead with 9% antimony used in electroplating baths for durability. Classified under HTS 7801.91.00.00 since antimony predominates as the alloying element. Cast shapes intended for immersion without machining.
High-Purity Antimonial Lead T-Bar 13% Sb
T-shaped unwrought lead bars containing 13% antimony, favored for bearing alloys and precision casting. HTS 7801.91.00.00 designation stems from antimony as the key secondary element. High-purity minimizes impurities for critical applications.