Share:|Follow us on LinkedIn

Clad 3003 Aluminum Alloy Plate 6mm

Clad 3003 aluminum-manganese alloy plate exactly 6mm thick for heat exchangers and tanks. Classified HTS 7606.92.60.95 as clad alloy ≤6.3mm thick exceeding 0.2mm. Good formability suits pressure vessel fabrication.

Import Duty Rates by Country of Origin

Origin Country	MFN Rate	Ch.99 Surcharges	Total Effective Rate
🇨🇳China	6.5%	+35.0%	41.5%
🇲🇽Mexico	6.5%	+10.0%	16.5%
🇨🇦Canada	6.5%	+10.0%	16.5%
🇩🇪Germany	6.5%	+10.0%	16.5%
🇯🇵Japan	6.5%	+10.0%	16.5%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

7606.92Same rate: 41.5%

If measured thickness >6.3mm

Explicit thickness threshold separates 7606.92.60 from .90 subheadings.

8419.89Lower: 14.2% vs 41.5%

If machined into heat exchanger plates

Finished machinery parts supersede raw material classification.

7606.91.30Lower: 38% vs 41.5%

If rectangular but considered strip

Width/thickness ratio may classify narrow products as strip vs. plate.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Get AI-powered classification Calculate exact duty

Import Tips & Compliance

• 6mm border thickness—measure multiple points; average determines classification

• Pressure vessel codes (ASME) documentation aids customs valuation and preferences

• Cladding often 5-10% total thickness; declare accurately for duty computation

Related Products under HTS 7606.92.60.95

Clad Aluminum Alloy 5052 Sheet 3mm Thick

This is a clad aluminum alloy 5052 plate, approximately 3mm thick, used in aerospace for its corrosion resistance and strength. It falls under HTS 7606.92.60.95 as it is clad aluminum alloy sheet exceeding 0.2mm but not over 6.3mm thick. The cladding provides enhanced surface protection while maintaining the alloy's core properties.

Marine-Grade Clad 5083 Aluminum Plate 2.5mm

Clad 5083 aluminum alloy plate, 2.5mm thick, designed for shipbuilding and marine applications due to excellent weldability. HTS 7606.92.60.95 applies as it's a clad alloy plate exceeding 0.2mm but ≤6.3mm thick. Cladding enhances saltwater corrosion resistance.

Clad 7075 Aluminum Alloy Sheet 4.5mm

High-strength clad 7075 aluminum alloy sheet, 4.5mm thick, commonly used in aircraft structural components. Classified under HTS 7606.92.60.95 due to its clad construction and thickness between 0.2mm and 6.3mm. The cladding protects the high-zinc alloy from corrosion.