2024-T3 Aluminum Alloy Sheet 1.6mm Thick
2024-T3 aluminum alloy sheet, 1.6mm thick, for fuselage skins in aviation. Unclad alloy strip/plate under HTS 7606.92.3035 due to thickness 0.2-6.3mm. Copper alloyed for high fatigue resistance.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If rectangular but clad
Cladding changes material composition classification.
If as aircraft parts post-fabrication
Machined into specific aircraft components uses Chapter 88.
If extruded into wire ≤6mm
Wire products per note to 7616.91 distinguish from sheets.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• ITAR-controlled for defense applications—declare end-use to avoid embargo issues
• Sheets often shipped coiled; uncoil and measure flat thickness for classification
Related Products under HTS 7606.92.30.35
6061-T6 Aluminum Alloy Sheet 3mm Thick
A rectangular sheet made from 6061-T6 aluminum alloy, measuring 3mm in thickness, exceeding 0.2mm but not over 6.3mm. Classified under HTS 7606.92.3035 as it is an unclad plate/sheet/strip of aluminum alloy. Ideal for structural applications in aerospace and automotive industries.
5052-H32 Aluminum Alloy Plate 5mm Thick
Marine-grade 5052-H32 aluminum alloy plate, 5mm thick, used for boat hulls and tanks. Fits HTS 7606.92.3035 as an unclad alloy plate exceeding 0.2mm but ≤6.3mm thickness. High corrosion resistance due to magnesium content.
3003-H14 Aluminum Alloy Sheet 2.5mm Thick
3003-H14 aluminum alloy sheet, 2.5mm thick, commonly used for cookware and chemical tanks. Unclad, rectangular form exceeding 0.2mm but ≤6.3mm qualifies for HTS 7606.92.3035. Manganese alloyed for good formability.
5083-H116 Aluminum Alloy Plate 6mm Thick
5083-H116 marine-grade aluminum alloy plate at 6mm thickness for shipbuilding and offshore platforms. HTS 7606.92.3035 for unclad alloy plates 0.2-6.3mm thick. Excellent weldability and seawater resistance.
6063-T6 Aluminum Alloy Plate 4mm Thick
6063-T6 aluminum alloy plate, 4mm thick, for architectural panels and frames. Fits unclad alloy HTS 7606.92.3035 for thicknesses 0.2-6.3mm. Good extrusion and finishing qualities.
1100-H14 Aluminum Alloy Sheet 0.8mm Thick
Near-pure 1100-H14 aluminum alloy sheet at 0.8mm thickness for reflectors and packaging. Though low alloy, exceeds non-alloy limits qualifying HTS 7606.92.3035 unclad ≤6.3mm. High reflectivity and ductility.