Clad Aluminum 5052 Sheet
This is a rectangular aluminum plate exceeding 0.2 mm thickness, clad with a thin layer of pure aluminum on one or both sides for corrosion protection, based on non-alloyed aluminum core. It falls under HTS 7606.11.60.00 as 'clad' rectangular plates of aluminum, not alloyed. Commonly used in aerospace and marine applications requiring enhanced durability.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If aluminum alloy core used
Alloyed aluminum (Al predominant but other elements >1%) changes to alloyed plates under 7606.12, even if clad.
If not rectangular shape
Non-rectangular (e.g., circular) plates/sheets fall under 'other' shapes in 7606.91, regardless of alloy status.
If shaped into doors/panels
Aluminum structures like clad panels/doors are classified as finished articles in Chapter 76, not raw plates.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify cladding thickness and confirm aluminum purity meets 'not alloyed' definition (>99% Al); provide mill test certificates for composition
• Ensure accurate thickness measurement to avoid reclassification to foil
• Watch for alloy content exceeding limits which shifts to 7606.12
Related Products under HTS 7606.11.60.00
Marine Grade Clad Aluminum Plate
A square clad aluminum plate >0.2 mm thick, featuring a pure aluminum cladding over non-alloyed base for superior saltwater resistance. Classified under 7606.11.60.00 due to its rectangular form and 'clad' construction per subheading definitions. Ideal for boat hulls and shipbuilding.
Clad Pure Aluminum Building Panel Sheet
Rectangular clad sheet of unalloyed aluminum (>0.2 mm thick) with protective pure Al cladding for architectural facades. Meets HTS 7606.11.60.00 as clad, non-alloyed rectangular plate/sheet. Used in curtain wall systems for weatherproofing.
Corrosion-Resistant Clad Al Sheet for Heat Exchangers
Clad unalloyed aluminum rectangular sheet >0.2 mm thick, with sacrificial anode cladding for heat exchanger fins. Fits HTS 7606.11.60.00 as clad non-alloyed plate. Essential for HVAC and automotive condensers.
Clad Aluminum Roofing Sheet
Rectangular clad plate of pure non-alloyed aluminum >0.2 mm for roofing panels, clad to prevent oxidation. Under HTS 7606.11.60.00 for clad rectangular sheets. Durable for commercial buildings.
Battery Clad Aluminum Current Collector Sheet
Ultra-pure clad aluminum rectangular sheet >0.2 mm for EV battery current collectors, with carbon-clad layer but aluminum base non-alloyed. HTS 7606.11.60.00 for clad plates. Critical for lithium-ion batteries.
Clad Aluminum Cookware Base Sheet
Three-layer clad rectangular sheet (pure Al exterior over core) >0.2 mm thick for cookware bottoms, non-alloyed aluminum. Classed HTS 7606.11.60.00 as clad plate. Enables even heating.