Pure Aluminum Baler Wire 3.2mm
3.2mm high-tensile pure aluminum wire for agricultural balers and industrial bundling machines. Classifies under 7605.19.00.00 as non-alloyed aluminum wire, other. Lighter weight alternative to steel baling wire.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If steel bale tie wire
Traditional steel baler wire classifies in Chapter 73 screws/bolts.
If alloyed structural
Higher strength aluminum alloys for heavy duty become tube/pipe.
If baler machine parts
Integrated into machinery becomes parts of packing machines.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Confirm breaking strength specs for baler compatibility
• Large diameter still <6mm qualifies as wire per notes
• Machine vs. hand tying affects packaging but not classification
Related Products under HTS 7605.19.00.00
99.5% Pure Aluminum Electrical Wire
This is high-purity aluminum wire (over 99% aluminum by weight) used in electrical applications such as winding coils for motors and transformers. It falls under HTS 7605.19.00.00 as it is aluminum wire, not alloyed, and not specifically for aerospace use. The wire's cross-section is typically under 6mm, meeting chapter definitions.
Non-Alloyed Aluminum Magnet Wire 18 AWG
Enamel-coated pure aluminum magnet wire (18 AWG, ~1mm diameter) for electromagnetic coils in inductors and solenoids. Classified under 7605.19.00.00 as non-alloyed aluminum wire, other than aerospace types. Purity meets 'not alloyed' definition with minimal impurities.
Pure Aluminum Binding Wire 1.6mm
1.6mm diameter soft pure aluminum wire used for binding rebar in construction and manual tying applications. It qualifies under HTS 7605.19.00.00 as other non-alloyed aluminum wire. Meets aluminum purity standards with iron and silicon impurities below specified limits.
High-Purity Aluminum Annealed Wire 2.0mm
Annealed 99.7% pure aluminum wire (2.0mm) for flexible cabling and lightweight electrical conductors. Falls under 7605.19.00.00 as other non-alloyed aluminum wire. Annealing process maintains non-alloyed status per chemical composition limits.
99% Aluminum Straight Wire Rods 3mm
Straight lengths of 3mm diameter 99% pure aluminum wire used in wire forming and welding wire feedstock. Classified in HTS 7605.19.00.00 as other non-alloyed aluminum wire. Purity certification confirms no alloying elements exceed chapter note thresholds.
Pure Aluminum Fence Wire 1.2mm
1.2mm galvanized pure aluminum wire for rural fencing and animal enclosures, valued for corrosion resistance. Under HTS 7605.19.00.00 as other non-alloyed aluminum wire. Galvanizing is minimal zinc coating, not affecting base aluminum alloy status.