99.7% Aluminum Spoke Wire 2.3mm
2.3mm pure aluminum wire drawn for bicycle and motorcycle wheel spokes. HTS 7605.19.00.00 covers non-alloyed aluminum wire used in spoke manufacturing. Provides lightweight strength alternative to steel spokes.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If finished wheel spokes
Fabricated into spokes becomes bicycle parts in Chapter 87.
If alloy rim profiles
Wheel rim material (6061 alloy) differs from pure spoke wire.
If steel spoke wire
Traditional steel bicycle spokes classify in Chapter 73 nails/screws.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Butt-end specifications for spoke forming process
• Wire diameter tolerance critical for spoke machinery
• Cut and headed becomes finished spoke, not wire
Related Products under HTS 7605.19.00.00
99.5% Pure Aluminum Electrical Wire
This is high-purity aluminum wire (over 99% aluminum by weight) used in electrical applications such as winding coils for motors and transformers. It falls under HTS 7605.19.00.00 as it is aluminum wire, not alloyed, and not specifically for aerospace use. The wire's cross-section is typically under 6mm, meeting chapter definitions.
Non-Alloyed Aluminum Magnet Wire 18 AWG
Enamel-coated pure aluminum magnet wire (18 AWG, ~1mm diameter) for electromagnetic coils in inductors and solenoids. Classified under 7605.19.00.00 as non-alloyed aluminum wire, other than aerospace types. Purity meets 'not alloyed' definition with minimal impurities.
Pure Aluminum Binding Wire 1.6mm
1.6mm diameter soft pure aluminum wire used for binding rebar in construction and manual tying applications. It qualifies under HTS 7605.19.00.00 as other non-alloyed aluminum wire. Meets aluminum purity standards with iron and silicon impurities below specified limits.
High-Purity Aluminum Annealed Wire 2.0mm
Annealed 99.7% pure aluminum wire (2.0mm) for flexible cabling and lightweight electrical conductors. Falls under 7605.19.00.00 as other non-alloyed aluminum wire. Annealing process maintains non-alloyed status per chemical composition limits.
99% Aluminum Straight Wire Rods 3mm
Straight lengths of 3mm diameter 99% pure aluminum wire used in wire forming and welding wire feedstock. Classified in HTS 7605.19.00.00 as other non-alloyed aluminum wire. Purity certification confirms no alloying elements exceed chapter note thresholds.
Pure Aluminum Fence Wire 1.2mm
1.2mm galvanized pure aluminum wire for rural fencing and animal enclosures, valued for corrosion resistance. Under HTS 7605.19.00.00 as other non-alloyed aluminum wire. Galvanizing is minimal zinc coating, not affecting base aluminum alloy status.