Unalloyed Aluminum Wire Rod 9mm
A solid cylindrical unalloyed aluminum wire rod with a 9mm diameter, containing at least 99% aluminum by weight and no other element exceeding specified limits. It falls under HTS 7605.11.00.00 because it is not alloyed aluminum wire where the maximum cross-sectional dimension exceeds 7 mm. Primarily used as feedstock for drawing into thinner wires in electrical and manufacturing applications.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | 2.6% | +35.0% | 37.6% |
| 🇲🇽Mexico | 2.6% | +10.0% | 12.6% |
| 🇨🇦Canada | 2.6% | +10.0% | 12.6% |
| 🇩🇪Germany | 2.6% | +10.0% | 12.6% |
| 🇯🇵Japan | 2.6% | +10.0% | 12.6% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If aluminum alloyed
Alloyed aluminum (Al not predominant or exceeding element limits in note (b)) shifts to 7605.21 for similar wire dimensions.
If maximum cross-section ≤7 mm
Wire rods or bars with smaller dimensions fall under 7604.21 for non-alloyed aluminum profiles/bars.
If shaped wire ≤6mm and not solid round
Chapter note specifies 7616.91 for non-round wire ≤6mm cross-section, excluding solid bars over 7mm.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify aluminum purity via mill test certificate to confirm 'not alloyed' status per chapter note (a), avoiding reclassification as alloy
• Provide detailed cross-sectional measurements in documentation; dimensions >7mm must be explicitly noted to match subheading
Related Products under HTS 7605.11.00.00
Pure Aluminum Wire Rod 12mm Diameter
High-purity unalloyed aluminum wire rod measuring 12mm in diameter, meeting the strict composition limits for non-alloyed aluminum. Classified under HTS 7605.11.00.00 due to its wire form and cross-sectional dimension exceeding 7 mm. Used in extrusion processes for power transmission lines and structural components.
Electrical Grade Aluminum Wire Rod 8.5mm
Unalloyed aluminum wire rod optimized for electrical conductivity, 8.5mm diameter, with purity ≥99% Al. Fits HTS 7605.11.00.00 for non-alloyed wire >7 mm cross-section. Drawn into conductors for overhead power lines.
10.5mm EC Aluminum Wire Rod
Electrical conductor (EC) grade unalloyed aluminum wire rod, 10.5mm cross-section, ≥99.7% Al. HTS 7605.11.00.00 for non-alloyed wire exceeding 7 mm. Key material for ACSR power transmission cables.
8mm Borderline Aluminum Wire Rod
Unalloyed aluminum wire rod precisely at 8mm diameter, confirming >7 mm for HTS 7605.11.00.00 classification. Non-alloyed purity per definitions, used in general wire fabrication.
14mm Structural Al Wire Rod
14mm unalloyed aluminum wire rod for structural wire rope production, pure Al composition. HTS 7605.11.00.00 specifies non-alloyed wire >7 mm. Applied in construction and marine rigging.
99.5% Aluminum Wire Rod 10mm
Unalloyed aluminum wire rod with 99.5% Al content and 10mm maximum cross-section, compliant with elemental limits in chapter note (a). HTS 7605.11.00.00 applies as non-alloyed wire exceeding 7 mm dimension. Common in aerospace and automotive wire production.