Aluminum 1100 Series Round Stock 5/8 Inch
Series 1100 unalloyed aluminum round bar with 5/8-inch cross-section, commercially pure for general fabrication. Conforms to note (a) limits on Fe+Si and other elements. Classified in HTS 7604.10.30.00 for round non-alloyed aluminum rods.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If rectangular or oval cross-section
Non-circular cross-sections are deemed profiles, not bars/rods with round section.
If wire rod in coils
Wire rods, even round, are under 7605 if intended for drawing into wire.
If threaded or machined into bolts/screws
Finished fasteners from aluminum rod are cloth, grill, netting under 7616.91.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Use ASTM B211 certification for wrought aluminum bars to support classification
• Document length and diameter precisely; short lengths risk reclass as 'articles' in 7616
Related Products under HTS 7604.10.30.00
99.5% Pure Aluminum Round Rod 1/4 Inch Diameter
A straight round rod made from unalloyed aluminum containing at least 99% aluminum by weight, with iron plus silicon content under 0.1%. It has a uniform circular cross-section and is used in manufacturing and construction. Classified under HTS 7604.10.30.00 as an aluminum bar or rod, not alloyed, with round cross section.
Pure Aluminum Round Rod 3/8 Inch for Machining
Unalloyed aluminum rod with 3/8-inch diameter round cross-section, ideal for CNC machining into fittings. Aluminum content exceeds 99%, other elements within limits per note (a). HTS 7604.10.30.00 applies to these non-alloyed round bars and rods.
Non-Alloyed Aluminum Round Bar 1 Inch Diameter
1-inch diameter round bar of unalloyed aluminum for structural supports and prototypes. Purity meets Chapter 76 note (a): ≥99% Al, minimal impurities. HTS 7604.10.30.00 covers these round cross-section bars and rods.
99.7% Aluminum Round Bar 9/16 Inch
High-purity 99.7% unalloyed aluminum round bar, 9/16-inch diameter for laboratory equipment. Meets all subheading note criteria for non-alloyed. Under HTS 7604.10.30.00 as round rod.
Aluminum Round Rod 11/16 Inch Non-Alloyed
11/16-inch diameter non-alloyed aluminum round rod for automotive prototypes. Elemental composition strictly within note (a) limits. Classified HTS 7604.10.30.00 for round section bars.
Unalloyed Aluminum Round Bar 1/2 Inch Diameter
High-purity unalloyed aluminum bar with 1/2-inch round cross-section, suitable for aerospace components and precision machining. Meets subheading note (a) for non-alloyed aluminum. Falls under HTS 7604.10.30.00 due to its round rod form and purity.