99.7% Pure Aluminum Ingots
High-purity aluminum ingots containing at least 99% aluminum by weight, with iron plus silicon not exceeding 0.1%, used primarily for remelting in manufacturing processes. Classified under HTS 7601.10.60 as unwrought, non-alloyed aluminum not covered by purity-specific subheadings. Meets the official definition of 'aluminum, not alloyed' due to minimal impurity levels.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If contains >0.1% Fe+Si or alloying elements like Cu>0.2%
Exceeds non-alloyed limits per chapter note (a), shifting to aluminum alloys in 7601.20.
If ≥99.95% purity
Higher purity qualifies for specific subheading 7601.10.30 within non-alloyed aluminum.
If classified as aluminum waste or scrap
Unwrought scrap fits Chapter 26 for metal wastes, not primary unwrought in Chapter 76.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill test certificates verifying aluminum content ≥99% and Fe+Si ≤0.1% to confirm non-alloyed status
• Declare exact chemical composition; misclassification as alloyed (7601.20) can trigger audits
• Use NA form for quota eligibility if applicable; track annual unwrought aluminum import limits
Related Products under HTS 7601.10.60
Primary Aluminum Billets 99.5% Pure
Cylindrical unwrought aluminum billets cast from primary smelting, 99.5% Al with controlled impurities, intended for extrusion into profiles. Falls under 7601.10.60 as 'other' non-alloyed unwrought aluminum per subheading definitions. Not alloyed since no element exceeds specified limits.
Aluminum T-Bar Stock 99.6% Purity
T-shaped unwrought aluminum bars produced by continuous casting, 99.6% pure for remelting or direct fabrication. HTS 7601.10.60 applies to this non-alloyed form not fitting higher purity categories. Conforms to chapter note definitions with impurities below limits.
High-Purity Aluminum Slabs 99.8%
Rectangular aluminum slabs from electrolytic refining, 99.8% Al purity for rolling mill feedstock. Classified in 7601.10.60 as other unwrought non-alloyed aluminum. Impurity profile satisfies chapter note (a) table limits.
99.9% Aluminum Sow Bars
Large trapezoidal sow bars of 99.9% purity from primary reduction cells, used in foundries. Fits 7601.10.60 as unwrought non-alloyed aluminum 'other'. Exceeds typical purity but below 99.95% dedicated code.
Non-Alloyed Aluminum Notch Bars
Notched bars of 99.2% pure aluminum for easy remelting, cast in standard foundry sizes. Classified under 7601.10.60 for other unwrought non-alloyed forms. Impurities strictly within chapter note tolerances.
Purity-Controlled Aluminum Skimmed Metal
Skimmed surface metal from molten aluminum pots, refined to 99.3% purity for remelt. HTS 7601.10.60 as other non-alloyed unwrought aluminum. Controlled to meet exact subheading note criteria.