High-Purity Aluminum Strip Coil 6.5mm
Unwrought, non-alloyed aluminum strip in coils with a uniform 6.5mm width, made from 99.7% pure aluminum meeting subheading note (a). The least cross-sectional dimension is 6.5mm, supplied in continuous coils for downstream processing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If contains aluminum alloys
If Fe+Si >0.1% or other elements exceed limits, it's classified as unwrought aluminum alloy.
If thickness ≤0.2mm
Thin strips become aluminum wire of 7605 if cross-section qualifies as 'wire' ≤6mm.
If not in coils or >9.5mm dimension
Straight lengths or larger profiles are bars/rods, not qualifying for coil subheading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit mill test report confirming aluminum purity and element limits per chapter note (a)
• Document coil form and exact cross-section measurements to avoid reclassification as foil
• Check for alloying elements; even trace Cu >0.2% without limits could shift to alloyed category
Related Products under HTS 7601.10.30.00
99.5% Pure Aluminum Wire Coil 8mm
This is unwrought aluminum, not alloyed, containing at least 99% aluminum by weight with iron plus silicon under 0.1%. It has a uniform 8mm cross-section throughout its length and is supplied in coils, fitting HTS 7601.10.30.00 precisely as it meets the dimensional criteria of least cross-section ≤9.5mm.
Non-Alloyed Aluminum Rod Coil 9mm
Continuous coil of unwrought aluminum rod, 99% pure (non-alloyed per note (a)), with uniform circular 9mm cross-section throughout. Ideal for wire drawing, it meets the HTS 7601.10.30.00 criteria for coil form and dimension.
99.9% Pure Al Wire in Coils 7.2mm
High-grade 99.9% pure aluminum wire in coiled form, unwrought and non-alloyed, featuring uniform 7.2mm cross-section. Conforms to HTS 7601.10.30.00 for its dimensional and purity specifications.
Casting Feedstock Al Coil 4.8mm
Non-alloyed aluminum coil used as feedstock for continuous casting, 4.8mm uniform cross-section, ≥99% Al purity. Classed under HTS 7601.10.30.00 due to coil form and size limits.
Aluminum Billet Strip Coil 5mm
Unwrought non-alloyed aluminum in coil form, derived from billet casting, with 5mm least cross-sectional dimension and uniform section. Purity exceeds 99% Al with compliant element limits.