Cold-Formed Nickel Foil for Flexible Circuits
Ultra-thin cold-formed nickel foil laminated into flexible printed circuits for wearables. HTS 7506.10.10.00 non-alloyed foil with cold-rolled ductility for bending. Enables compact IoT devices.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If polyester laminate with nickel
Plastic film predominates in flex circuit classification.
If finished flexible circuit boards
Electronic integrated circuits by function.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Flex endurance specs (>100k cycles) verify circuit-grade material
• Distinguish raw foil from pre-laminated flex stock
• IPC-4562 standards support electronics material valuation
Related Products under HTS 7506.10.10.00
Cold-Formed Nickel Foil for Battery Anodes
Thin nickel foil, cold-formed to precise thicknesses under 0.15mm, used as anode current collectors in lithium-ion batteries. Classified under HTS 7506.10.10.00 as non-alloyed nickel foil that has undergone cold-forming processes without annealing. Ideal for electronics and EV battery production.
Cold-Formed Pure Nickel Sheet for Chemical Processing
Cold-rolled nickel sheets (0.5-2mm thick) of 99.9% pure nickel, resistant to corrosive acids in chemical reactors. HTS 7506.10.10.00 applies to non-alloyed nickel plates/sheets produced via cold-forming for superior surface finish. Used in pharmaceutical and petrochemical equipment.
Cold-Formed Nickel Strip for Fuel Cell Components
Narrow cold-formed nickel strips (0.1-0.5mm thick) for bipolar plates in hydrogen fuel cells, offering high conductivity. Falls under 7506.10.10.00 as non-alloyed nickel strip cold-worked for thin, uniform profiles. Critical for green energy applications.
Cold-Formed Nickel Plate for Aerospace Shims
Precision cold-formed nickel plates used as shims and spacers in aircraft engines, with tight tolerances. HTS 7506.10.10.00 for non-alloyed nickel plates cold-worked without heat treatment. Provides corrosion resistance in high-temp environments.
Cold-Formed Nickel Foil for EMI Shielding
Ultra-thin (<0.05mm) cold-formed pure nickel foil for electromagnetic interference shielding in electronics. Classified 7506.10.10.00 as non-alloyed nickel foil cold-rolled for high formability. Essential for 5G devices and medical equipment.
Cold-Rolled Nickel Sheet for Marine Hardware
Cold-formed 1mm nickel sheets for corrosion-resistant marine fittings and boat hardware. HTS 7506.10.10.00 covers non-alloyed nickel sheets with cold-worked grain structure for durability. Withstands saltwater exposure better than stainless.