Share:|Follow us on LinkedIn

Cold-Formed Nickel Foil for Catalyst Supports

Perforated cold-formed nickel foil used as structured catalyst supports in chemical reactors. 7506.10.10.00 pure nickel foil with cold-rolled strength for high-pressure use. Enables efficient gas-liquid reactions.

Import Duty Rates by Country of Origin

Origin Country	MFN Rate	Ch.99 Surcharges	Total Effective Rate
🇨🇳China	3%	+37.5%	40.5%
🇲🇽Mexico	3%	+10.0%	13%
🇨🇦Canada	3%	+10.0%	13%
🇩🇪Germany	Free	+10.0%	10%
🇯🇵Japan	Free	+12.5%	12.5%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

8421.39.01Lower: 37.5% vs 40.5%

If catalyst bed assemblies

Filter/centrifuge parts for chemical processing.

3815.90.50.00Higher: 42.5% vs 40.5%

If coated with active catalyst

Catalyst preparations classify chemically.

7508.90Lower: 15.5% vs 40.5%

If perforated finished supports

Fabricated nickel articles beyond basic foil.

Not sure which classification is right?

The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.

Classify and price this product Calculate exact duty

Import Tips & Compliance

• Detail aperture size/pattern in technical drawings

• HAZOP documentation supports industrial chemical use

• Catalyst substrate qualification affects R&D tariff suspensions

Related Products under HTS 7506.10.10.00

Cold-Formed Nickel Foil for Battery Anodes

Thin nickel foil, cold-formed to precise thicknesses under 0.15mm, used as anode current collectors in lithium-ion batteries. Classified under HTS 7506.10.10.00 as non-alloyed nickel foil that has undergone cold-forming processes without annealing. Ideal for electronics and EV battery production.

Cold-Formed Pure Nickel Sheet for Chemical Processing

Cold-rolled nickel sheets (0.5-2mm thick) of 99.9% pure nickel, resistant to corrosive acids in chemical reactors. HTS 7506.10.10.00 applies to non-alloyed nickel plates/sheets produced via cold-forming for superior surface finish. Used in pharmaceutical and petrochemical equipment.

Cold-Formed Nickel Strip for Fuel Cell Components

Narrow cold-formed nickel strips (0.1-0.5mm thick) for bipolar plates in hydrogen fuel cells, offering high conductivity. Falls under 7506.10.10.00 as non-alloyed nickel strip cold-worked for thin, uniform profiles. Critical for green energy applications.