Pure Nickel Welding Wire 0.035 inch
A straight spool of pure nickel wire with a diameter of 0.035 inches, used primarily for welding applications in corrosive environments. Classified under HTS 7505.21.50.00 as non-alloyed nickel wire that is not cold-formed, distinguishing it from drawn or shaped variants.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If cold-formed or drawn
Cold-formed nickel wire shifts to this subheading due to additional processing.
If coated for welding electrodes
Coated welding wire classifies as cored wire for electrodes, not bare nickel wire.
If actually copper-nickel alloy
Alloyed nickel-copper wire falls under copper alloy headings in Chapter 74.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify nickel purity exceeds 99% with mill test certificates to confirm non-alloyed status
• Ensure wire is hot-rolled or extruded, not cold-drawn, via manufacturer specs to match 'not cold-formed' criterion
• Declare exact diameter and spool weight accurately; common pitfall is undervaluing for bulk spools
Related Products under HTS 7505.21.50.00
Nickel Anode Rod Wire 1/8 inch
Soft pure nickel wire formed into rods for use as sacrificial anodes in electroplating baths and cathodic protection. Falls under HTS 7505.21.50.00 for non-alloyed nickel wire not subjected to cold-forming processes.
Pure Nickel Resistance Wire 24 AWG
High-purity nickel wire in 24 AWG size for heating elements and precision resistors in laboratory equipment. HTS 7505.21.50.00 applies to this not cold-formed, non-alloyed nickel wire product.
Pure Nickel Battery Tab Wire 0.15mm
Thin pure nickel wire for battery tab connections in lithium-ion cells, produced via hot processes without cold-forming. HTS 7505.21.50.00 covers this non-alloyed wire specification.
Nickel Thermocouple Base Wire Type K
Pure nickel leg wire for Type K thermocouples, used in temperature sensors, in non-cold-formed straight lengths. Fits HTS 7505.21.50.00 as non-alloyed nickel wire.
Nickel Evaporation Wire 1mm Pellets
Pure nickel wire segmented into 1mm pellets for vacuum evaporation in thin-film deposition, not cold-formed. Classified under HTS 7505.21.50.00 for non-alloyed wire.
Pure Nickel Dummy Run Wire 2mm
2mm pure nickel wire used for dummy runs in continuous casting and extrusion trials. HTS 7505.21.50.00 for its non-alloyed, not cold-formed wire characteristics.