Cold-Formed Pure Nickel Round Rod 1/4 Inch Diameter
This is a high-purity nickel rod, cold-formed through drawing or extrusion processes to achieve precise 1/4 inch diameter dimensions. It consists of unalloyed nickel (minimum 99.8% Ni) and is used in chemical processing equipment due to its corrosion resistance. Classified under HTS 7505.11.10.00 as cold-formed bars and rods of non-alloyed nickel.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If hot-rolled or hot-formed
Hot-formed nickel rods are classified separately from cold-formed in the same non-alloyed subcategory.
If in coil form exceeding specified dimensions
Nickel plates/sheets/strip in coils over 0.15mm thick use Chapter 75 heading 7506, not bars/rods.
If containing alloying elements like chromium
Alloyed nickel bars/rods (e.g., Inconel types) fall under 7505.21 for Ni-Cr alloys.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify nickel purity exceeds 99% with mill test certificates to confirm non-alloyed status and avoid reclassification
• Include detailed cold-forming process documentation, as hot-rolled equivalents fall under 7505.11.20.00
Related Products under HTS 7505.11.10.00
Cold-Formed Nickel Profile for Chemical Pumps
Custom cold-formed nickel profile rod for pump shafts in acidic environments, unalloyed for purity. Achieves tight tolerances via cold reduction. HTS 7505.11.10.00 for non-alloyed cold-formed profiles.
Cold-Drawn Nickel Rod for Battery Anodes
Cold-drawn pure nickel rod used as anode material in nickel-metal hydride batteries. High purity prevents contamination. Classified HTS 7505.11.10.00 cold-formed non-alloyed rods.
Cold-Formed Nickel Bar Stock 20mm Round
General-purpose cold-formed nickel bar stock, 20mm diameter, for machining into fittings. Unalloyed for broad corrosion resistance.
Cold-Formed Nickel Half-Round Profile
Half-round profile cold-formed from pure nickel for decorative trim in marine applications.
Cold-Drawn Nickel Rod 8mm for Electrodes
8mm cold-drawn nickel rod base for electroplating electrodes, pure nickel.
Cold-Formed Nickel Rectangular Bar 15x10mm
Rectangular cold-formed pure nickel bar for structural supports in labs.