Brass Ornamental Pipe 4 Inch

4-inch decorative brass pipe for architectural railings, copper-zinc polished finish. Other under 7411.21.50.00.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
๐Ÿ‡จ๐Ÿ‡ณChina3%+35.0%38%
๐Ÿ‡ฒ๐Ÿ‡ฝMexico3%+10.0%13%
๐Ÿ‡จ๐Ÿ‡ฆCanada3%+10.0%13%
๐Ÿ‡ฉ๐Ÿ‡ชGermany3%+10.0%13%
๐Ÿ‡ฏ๐Ÿ‡ตJapan3%+10.0%13%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

7418Lower: 13% vs 38%

If fabricated into railing components

Table, kitchen ware/other household articles if decorative set.

7308.90Lower: 10% vs 38%

If steel ornamental equivalent

Steel versions under Chapter 73.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

โ€ข Surface finish (polish/matte) documentation

โ€ข Not 'articles' unless drilled/tapped

Related Products under HTS 7411.21.50.00

Brass Plumbing Pipe 1/2 Inch

A 1/2-inch diameter seamless brass pipe made from copper-zinc base alloy (brass) used for potable water supply lines in residential plumbing. It falls under HTS 7411.21.50.00 as 'other' copper-zinc base alloy tubes not specified elsewhere in the subheading, meeting the definition where zinc predominates over other elements with less than 5% nickel.

Brass Refrigeration Tubing 3/8 Inch

3/8-inch OD annealed brass tubing from copper-zinc alloy used in HVAC and refrigeration systems for refrigerant lines. Classified under HTS 7411.21.50.00 as 'other' brass tubes, with zinc as the predominant alloying element per chapter definitions.

Brass Hydraulic Line Tubing 1 Inch

Heavy-duty 1-inch brass tube from copper-zinc base alloy for hydraulic fluid lines in machinery. HTS 7411.21.50.00 applies to these 'other' brass pipes not qualifying for precision or specific diameter exclusions.

Brass Gas Distribution Pipe 3/4 Inch

3/4-inch brass pipe from copper-zinc alloy for natural gas distribution lines in buildings. Falls under 7411.21.50.00 as other brass tubes, zinc-dominant per subheading note (a).

Brass Instrument Tubing 5/16 Inch

5/16-inch drawn brass tubing from copper-zinc base alloy used to fabricate musical instrument components like trumpet valves. HTS 7411.21.50.00 covers these other brass tubes.

Brass Heat Exchanger Tubing 5/8 Inch

5/8-inch admiralty brass tube (C44300) with arsenic for heat exchangers in boilers/condensers. Under HTS 7411.21.50.00 as other copper-zinc base alloy tubes.