C693 Admiralty Brass Foil 0.09mm
C693 admiralty brass foil (arsenical copper-zinc), 0.09mm thick unbacked, for condenser tubesheets. Classified HTS 7410.12.0060: other unbacked copper alloy foil <0.15mm, brass alloy with zinc dominant.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | 1% | +35.0% | 36% |
| 🇲🇽Mexico | 1% | +10.0% | 11% |
| 🇨🇦Canada | 1% | +10.0% | 11% |
| 🇩🇪Germany | 1% | +10.0% | 11% |
| 🇯🇵Japan | 1% | +10.0% | 11% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If specifically copper-nickel-zinc (nickel silvers, Ni≥5%)
Higher nickel content reclassifies to specific nickel silver subheading.
If hollow profiles from foil
Formed into tubes/pipes moves to Chapter 74 tube headings.
If for electrical contacts as articles
End-use as finished electrical component under Chapter 85.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document minor elements (arsenic); ensure zinc predominates per brass definition
• Import in original rolls to avoid 'fabricated article' reclassification
Related Products under HTS 7410.12.00.60
C230 Red Brass Foil 0.13mm
C230 red brass foil (85/15 copper-zinc), 0.13mm thick unbacked, for architectural trim. Under HTS 7410.12.0060 as other unbacked copper alloy foil not over 0.15mm.
C280 Muntz Metal Foil 0.10mm
C280 Muntz metal foil (60/40 copper-zinc), 0.10mm unbacked, for propeller cladding. HTS 7410.12.0060: other copper-zinc brasses ≤0.15mm.
C342 Naval Brass Foil 0.07mm
C342 naval brass foil 0.07mm unbacked, arsenical variant for fittings. Fits 7410.12.0060 precisely.
C443 Arsenical Admiralty Foil 0.14mm
C443 arsenical admiralty brass foil 0.14mm, condenser stock, unbacked. HTS 7410.12.0060 other alloys.
C694 Aluminum Brass Foil 0.06mm
C694 aluminum brass foil 0.06mm unbacked, seawater resistant. 7410.12.0060 classification.
CDA 385 Free Machining Foil 0.03mm
Ultra-thin CDA 385 foil 0.03mm, leaded brass, unbacked. HTS 7410.12.0060.