C18 Brass Foil 0.1mm Thickness
Thin C18 brass alloy foil (copper-zinc with 18% zinc) measuring 0.1mm thick, not backed, used for decorative laminates and gaskets. Classified under HTS 7410.12.0060 as copper alloy foil thinner than 0.15mm, falling into 'other' copper-zinc brasses per subheading note (a). Excludes nickel silvers and bronzes due to composition.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | 1% | +35.0% | 36% |
| 🇲🇽Mexico | 1% | +10.0% | 11% |
| 🇨🇦Canada | 1% | +10.0% | 11% |
| 🇩🇪Germany | 1% | +10.0% | 11% |
| 🇯🇵Japan | 1% | +10.0% | 11% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If backed with paper, plastics, or similar materials
Backed copper alloy foils shift to 7410.22 regardless of thickness, as backing determines subheading.
If refined copper, not alloy
Purer copper foil (no alloying elements like zinc) falls under 7410.11, changing from alloy category.
If in rolls ≥125mm wide
Copper alloy foil presentation (rolls vs sheets) and width dictate 7409 classification over 7410.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill test certificate verifying copper-zinc brass composition (zinc > other elements, Ni <5%, Sn <3%) to confirm HTS 7410.12.0060
• Measure thickness excluding any backing; ensure declaration matches ≤0.15mm to avoid reclassification to thicker foils
Related Products under HTS 7410.12.00.60
C230 Red Brass Foil 0.13mm
C230 red brass foil (85/15 copper-zinc), 0.13mm thick unbacked, for architectural trim. Under HTS 7410.12.0060 as other unbacked copper alloy foil not over 0.15mm.
C280 Muntz Metal Foil 0.10mm
C280 Muntz metal foil (60/40 copper-zinc), 0.10mm unbacked, for propeller cladding. HTS 7410.12.0060: other copper-zinc brasses ≤0.15mm.
C342 Naval Brass Foil 0.07mm
C342 naval brass foil 0.07mm unbacked, arsenical variant for fittings. Fits 7410.12.0060 precisely.
C443 Arsenical Admiralty Foil 0.14mm
C443 arsenical admiralty brass foil 0.14mm, condenser stock, unbacked. HTS 7410.12.0060 other alloys.
C694 Aluminum Brass Foil 0.06mm
C694 aluminum brass foil 0.06mm unbacked, seawater resistant. 7410.12.0060 classification.
CDA 385 Free Machining Foil 0.03mm
Ultra-thin CDA 385 foil 0.03mm, leaded brass, unbacked. HTS 7410.12.0060.