C110 Electrolytic Tough Pitch Brass Foil 0.12mm
C110-grade electrolytic tough pitch brass foil, 0.12mm thick, unbacked, for shielding and transformers. Under HTS 7410.12.0060 as other copper alloy foil (brass composition) not exceeding 0.15mm, per copper-zinc alloy definition.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | 1% | +35.0% | 36% |
| 🇲🇽Mexico | 1% | +10.0% | 11% |
| 🇨🇦Canada | 1% | +10.0% | 11% |
| 🇩🇪Germany | 1% | +10.0% | 11% |
| 🇯🇵Japan | 1% | +10.0% | 11% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If minimal zinc (< alloy threshold)
Low alloying moves to refined copper foil in 7410.11.
If insulated for electrical use
Insulated copper foil for cables classified as insulated wire under Chapter 85.
If as finished articles like washers
Fabricated into articles changes from foil to 'other copper articles' in 7419.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify as copper-zinc base alloy; avoid generic 'copper foil' labels to prevent 7410.11 misrouting
• Thickness tolerance must be documented; >0.15mm risks higher duty subheading
Related Products under HTS 7410.12.00.60
C230 Red Brass Foil 0.13mm
C230 red brass foil (85/15 copper-zinc), 0.13mm thick unbacked, for architectural trim. Under HTS 7410.12.0060 as other unbacked copper alloy foil not over 0.15mm.
C280 Muntz Metal Foil 0.10mm
C280 Muntz metal foil (60/40 copper-zinc), 0.10mm unbacked, for propeller cladding. HTS 7410.12.0060: other copper-zinc brasses ≤0.15mm.
C342 Naval Brass Foil 0.07mm
C342 naval brass foil 0.07mm unbacked, arsenical variant for fittings. Fits 7410.12.0060 precisely.
C443 Arsenical Admiralty Foil 0.14mm
C443 arsenical admiralty brass foil 0.14mm, condenser stock, unbacked. HTS 7410.12.0060 other alloys.
C694 Aluminum Brass Foil 0.06mm
C694 aluminum brass foil 0.06mm unbacked, seawater resistant. 7410.12.0060 classification.
CDA 385 Free Machining Foil 0.03mm
Ultra-thin CDA 385 foil 0.03mm, leaded brass, unbacked. HTS 7410.12.0060.