Brass Stamping Foil 0.11mm
0.11mm cartridge brass foil for precision stamping blanks. Copper-zinc 70/30 alloy for HTS 7410.12.0030. Deep draw quality.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | 1% | +35.0% | 36% |
| 🇲🇽Mexico | 1% | +10.0% | 11% |
| 🇨🇦Canada | 1% | +10.0% | 11% |
| 🇩🇪Germany | 1% | +10.0% | 11% |
| 🇯🇵Japan | 1% | +10.0% | 11% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness >0.15mm
Copper alloy plate/sheet over foil thickness limit.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document grain direction and yield strength
• Prevent confusion with .16mm+ plate (7411)
• Mill certs mandatory for alloy verification
Related Products under HTS 7410.12.00.30
Brass Shim Stock Foil 0.05mm
Thin brass foil, 0.05mm thick, made from copper-zinc base alloy used for precision shimming in machinery assembly. It falls under HTS 7410.12.0030 as unbacked copper-zinc alloy foil not exceeding 0.15mm thickness. Ideal for gaskets and spacers in automotive and industrial applications.
Brass Etching Foil 0.1mm
0.1mm thick brass foil from copper-zinc alloy, designed for chemical etching processes in electronics prototyping. Classified under HTS 7410.12.0030 for unbacked brass foil ≤0.15mm. Commonly used for custom circuit masks and decorative nameplates.
Brass Gasket Foil 0.12mm
0.12mm brass foil from copper-zinc alloy, precision-cut for manufacturing thin gaskets in hydraulic systems. Falls under HTS 7410.12.0030 as unbacked foil ≤0.15mm thickness. Provides corrosion resistance in industrial seals.
Brass Decorative Foil 0.03mm
Ultra-thin 0.03mm brass foil used for decorative inlays in furniture and art. Copper-zinc base alloy qualifies for HTS 7410.12.0030 as unbacked foil not over 0.15mm. Polished finish for aesthetic applications.
Brass RF Shielding Foil 0.06mm
0.06mm thick brass foil engineered for RF/EMI shielding in electronics enclosures. Meets copper-zinc brass definition for HTS 7410.12.0030 unbacked foil ≤0.15mm. High conductivity for signal isolation.
Brass Heat Transfer Foil 0.09mm
9-micron brass foil for heat exchanger manufacturing, copper-zinc alloy. Classified HTS 7410.12.0030 for thin unbacked foil. Used in HVAC and refrigeration fin stock.