Brass Anode Foil 0.08mm
High-purity brass foil 0.08mm thick used as anode material in electroplating processes. Meets HTS 7410.12.0030 criteria as unbacked copper-zinc base alloy foil under 0.15mm. Essential for plating jewelry and hardware components.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | 1% | +35.0% | 36% |
| 🇲🇽Mexico | 1% | +10.0% | 11% |
| 🇨🇦Canada | 1% | +10.0% | 11% |
| 🇩🇪Germany | 1% | +10.0% | 11% |
| 🇯🇵Japan | 1% | +10.0% | 11% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness exceeds 0.15mm
Copper alloy foil >0.15mm but ≤0.2mm classifies under 7407 as thicker foil.
If refined copper only
Non-alloy copper foil uses 7410.11, lacking zinc for brass designation.
If printed for electrical use
Printed insulated copper foil for cables shifts to Chapter 85 insulated wire heading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Supply electroplating grade certifications and impurity levels (<0.5% others) to confirm brass classification
• Document width and temper (soft/half-hard) to prevent confusion with wire under 7413
Related Products under HTS 7410.12.00.30
Brass Shim Stock Foil 0.05mm
Thin brass foil, 0.05mm thick, made from copper-zinc base alloy used for precision shimming in machinery assembly. It falls under HTS 7410.12.0030 as unbacked copper-zinc alloy foil not exceeding 0.15mm thickness. Ideal for gaskets and spacers in automotive and industrial applications.
Brass Etching Foil 0.1mm
0.1mm thick brass foil from copper-zinc alloy, designed for chemical etching processes in electronics prototyping. Classified under HTS 7410.12.0030 for unbacked brass foil ≤0.15mm. Commonly used for custom circuit masks and decorative nameplates.
Brass Gasket Foil 0.12mm
0.12mm brass foil from copper-zinc alloy, precision-cut for manufacturing thin gaskets in hydraulic systems. Falls under HTS 7410.12.0030 as unbacked foil ≤0.15mm thickness. Provides corrosion resistance in industrial seals.
Brass Decorative Foil 0.03mm
Ultra-thin 0.03mm brass foil used for decorative inlays in furniture and art. Copper-zinc base alloy qualifies for HTS 7410.12.0030 as unbacked foil not over 0.15mm. Polished finish for aesthetic applications.
Brass RF Shielding Foil 0.06mm
0.06mm thick brass foil engineered for RF/EMI shielding in electronics enclosures. Meets copper-zinc brass definition for HTS 7410.12.0030 unbacked foil ≤0.15mm. High conductivity for signal isolation.
Brass Heat Transfer Foil 0.09mm
9-micron brass foil for heat exchanger manufacturing, copper-zinc alloy. Classified HTS 7410.12.0030 for thin unbacked foil. Used in HVAC and refrigeration fin stock.