C46400 Naval Brass Sheet
C46400 naval brass (59% Cu, 39.25% Zn, 1% Sn) sheet 0.6 mm x 250 mm for propeller shafts. Brass per note (a), fits dimensions.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If of phosphor bronzes specifically
Specific bronze alloys have prioritized subheadings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Tin analysis critical (<3%)
Related Products under HTS 7409.90.90.60
C69300 Brass Strip for Valves
C69300 leaded brass strip (67% Cu, 32% Zn, 1% Pb) 0.5 mm x 400 mm for plumbing valve stampings. HTS 7409.90.90.60: copper-zinc alloy strip <5 mm thick, <500 mm wide, brass per note (a).
C18200 Copper Chromium Strip
C18200 Cu-Cr (99% Cu, 1% Cr) strip 0.18 mm x 300 mm for resistance welding electrodes. 'Other' alloy per hierarchy.
C65500 Silicon Bronze Sheet
C65500 (96% Cu, 3% Si, 1% Mn) sheet 0.4 mm x 450 mm; Si predominant for bronzes? Fits 'other'.
CDA 687 Aluminum Brass Strip
CDA687 (76% Cu, 22% Zn, 2% Al) strip for condensers.
C26000 Cartridge Brass Sheet
C26000 cartridge brass sheet is a copper-zinc alloy plate with 30% zinc content, thickness 0.25 mm, and width 400 mm, used for precision stamping in ammunition casings and hardware. It falls under HTS 7409.90.90.60 as a copper alloy plate/sheet/strip exceeding 0.15 mm thick but less than 5 mm, with width under 500 mm. The brass composition meets the subheading note definition for copper-zinc base alloys where zinc predominates over other elements.
C11000 ETP Copper Strip
C11000 electrolytic tough pitch (ETP) copper strip is a high-purity copper (99.9%) plate with thickness 0.3 mm and width 300 mm, ideal for electrical connectors and bus bars. Although nearly pure copper, it qualifies under 'other copper alloys' in this subheading per HTS structure for refined copper products not elsewhere specified. Meets criteria for plates/sheets/strips >0.15 mm thick, <5 mm, <500 mm wide.