Half-Hard Phosphor Bronze Sheet for Stamping
Half-hard temper phosphor bronze sheet, 2 mm x 450 mm wide for progressive die stamping of clips and fasteners. Fits 7409.39.90.30 exactly: phosphor bronze plate >0.15 mm thick <5 mm, <500 mm width. Formability balances strength for high-volume parts.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If stamped into finished fasteners
Completed screws/bolts/pins of copper alloys move to 7318.
If copper matte/anodes (unrefined)
Primary forms before refining/rolling classified earlier in chapter.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Temper (H02 half-hard) doesn't change HTS; note in commercial invoice
• Flatness tolerance critical for stamping; inspect on arrival
• Anti-tarnish coating? If temporary, still uncoated classification
Related Products under HTS 7409.39.90.30
Phosphor Bronze Beryllium-Free Strip for Springs
High-performance phosphor bronze strip, 0.3 mm thick and 300 mm wide, designed for flat springs in automotive relays and switches. HTS 7409.39.90.30 applies as it's phosphor bronze (copper-tin-phosphorus alloy), thickness between 0.15-5 mm, width <500 mm. Offers superior fatigue resistance over beryllium copper alternatives.
Phosphor Bronze Foil-Like Strip for Musical Instruments
Thin phosphor bronze strip (0.18 mm thick, 150 mm wide) for reed tongues in accordions and harmonicas. HTS 7409.39.90.30 because >0.15 mm thickness excludes foil heading, phosphor bronze alloy, narrow dimensions. Provides tonal clarity and durability in reeds.
Grade C52400 Phosphor Bronze Narrow Strip
UNS C52400 phosphor bronze strip, 0.4 mm x 250 mm wide, for electrical switch contacts and thermostats. Under HTS 7409.39.90.30 as copper-tin alloy (10% tin, 0.1% P), specified thickness/width range. High conductivity and springback for reliable switching.
Phosphor Bronze Precision Strip for Bearings
Precision-rolled phosphor bronze strip 0.6 mm thick, 80 mm wide for split bushings and thrust washers. HTS 7409.39.90.30: meets phosphor bronze definition, narrow/thin dimensions. Embeddable lubricity reduces friction in sleeve bearings.
Phosphor Bronze UNS C51100 Strip
Low-tin UNS C51100 phosphor bronze strip, 0.25 mm x 200 mm wide for flexible connectors in electronics. HTS 7409.39.90.30 as copper-tin base (4.8% Sn, 0.05% P), qualifying dimensions. Cost-effective alternative with good bend properties.
Phosphor Bronze Tempered Strip for Clips
Spring-tempered phosphor bronze strip 0.35 mm thick, 120 mm wide for battery clips and retention springs. Under 7409.39.90.30: narrow phosphor bronze plate in specified gauge range. High yield strength ensures reliable springback.