Brass Battery Terminal Strip 1.3mm
Specialty brass strip 1.3mm thick, 300mm wide for battery terminals, Cu-Zn 65/35 alloy. Fits HTS 7409.29.00.75 as thin brass plate/sheet with precise narrow dimensions. High conductivity for automotive connectors.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If refined copper, not alloy
Pure copper sheets (not zinc alloy) fall under 7409.11.
If pre-formed into electrical connectors
Finished electrical apparatus parts under Chapter 85.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Specify electrical conductivity grade in specs for valuation purposes
• Pre-cut lengths must still qualify as strip, not parts (under 5m typically)
• RoHS compliance docs needed for electronic component precursors
Related Products under HTS 7409.29.00.75
Brass Shim Stock 0.5mm Thick
Precision brass shim stock made from copper-zinc base alloy, measuring 0.5mm thick, 300mm wide, and in coil form for easy cutting. Classified under HTS 7409.29.00.75 due to its thickness less than 1.6mm, width under 500mm, and brass composition exceeding 0.15mm thickness. Used for machinery alignment and spacing in industrial applications.
Brass Foil Label Stock 1.2mm
Thin brass sheet stock at 1.2mm thickness and 400mm width, used for manufacturing decorative labels and nameplates. Falls under HTS 7409.29.00.75 as copper-zinc alloy plate/sheet with thickness exceeding 0.15mm but less than 1.6mm and narrow width. Ideal for etching and engraving processes.
C26800 Brass Strip 0.8mm Thick
C26800 cartridge brass strip, 0.8mm thick by 250mm wide, in continuous coil for stamping and forming. HTS 7409.29.00.75 applies to this copper-zinc base alloy sheet with specified thin gauge and narrow width over 0.15mm. Commonly used in electronics connectors and hardware.
Yellow Brass Coil 1.0mm x 350mm
Yellow brass (70/30 copper-zinc) coil stock at 1.0mm thickness and 350mm width for fabrication. HTS 7409.29.00.75 covers this thin brass strip exceeding 0.15mm thickness with narrow dimension. Used in musical instruments and decorative trim.
Brass Nameplate Blank 0.9mm
Rectangular brass blanks 0.9mm thick, 200mm x 400mm sheets from Cu-Zn alloy for engraving. Under HTS 7409.29.00.75 as thin brass plate less than 1.6mm with width under 500mm. Pre-cut but unfinished for custom signage.
Architectural Brass Sheet 0.6mm
Polished architectural brass sheet 0.6mm thick, 420mm x cut-to-size under 500mm width. HTS 7409.29.00.75 for thin Cu-Zn base alloy plates exceeding 0.15mm. Used in door kicks and trim fabrication.