Of a width of 500 mm or more
Copper plates, sheets and strip, of a thickness exceeding 0.15 mm: > Of copper-zinc base alloys (brass): > Other > Of a thickness of less than 5 mm: > Of a width of 500 mm or more
Duty Rate (from China)
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Except as provided in headings 9903.88.13, 9903.88.18, 9903.88.33, 9903.88.34, 9903.88.35, 9903.88.36, 9903.88.37, 9903.88.38, 9903.88.40, 9903.88.41, 9903.88.43, 9903.88.45, 9903.88.46, 9903.88.48, 9903.88.56, 9903.88.64, 9903.88.66, 9903.88.67, 9903.88.68, or 9903.88.69, articles the product of China, as provided for in U.S. note 20(e) to this subchapter and as provided for in the subheadings enumerated in U.S. note 20(f)
Products classified under HTS 7409.29.00.50
C26000 Cartridge Brass Sheet
C26000 cartridge brass sheet is a copper-zinc alloy plate with 30% zinc content, thickness between 0.15 mm and 5 mm, and width exceeding 500 mm. It falls under HTS 7409.29.00.50 as it meets the definition of copper-zinc base alloys (brasses) in wide sheet form for applications like ammunition casings and hardware components.
C26800 Muntz Metal Brass Plate
C26800 Muntz metal is a 60/40 copper-zinc brass sheet, 0.2-4.8 mm thick and over 600 mm wide, used in marine hardware and architectural trim. Classified under HTS 7409.29.00.50 due to its brass alloy composition, specified thickness range, and wide format per chapter definitions.
C46400 Naval Brass Sheet
C46400 naval brass sheet (tin-modified brass) measures 1-4 mm thick by 550 mm wide, ideal for propeller shafts and valve stems. It qualifies under HTS 7409.29.00.50 as a copper-zinc base alloy with tin <3%, in the specified wide plate dimensions.
C36000 Free-Cutting Brass Strip
C36000 free-machining brass comes in 0.3 mm thick by 520 mm wide sheets for screw machine products and fittings. HTS 7409.29.00.50 applies to this wide brass strip with lead addition but zinc-dominant per subheading note (a).
C69300 Brass Condenser Tube Sheet
C69300 high-strength brass tube sheets are 2.5 mm thick x 610 mm wide for heat exchangers and condensers. This wide brass plate fits HTS 7409.29.00.50 as copper-zinc alloy in specified dimensions before tube forming.
C22000 Commercial Bronze Sheet
C22000 commercial bronze (90/10 Cu-Zn) sheets measure 0.8 mm x 580 mm wide for stamping decorative trim and nameplates. HTS 7409.29.00.50 covers this low-zinc brass alloy in wide plate form per chapter alloy definitions.
C23000 Red Brass Architectural Panel
C23000 red brass panels (85/15 Cu-Zn) are 1.2 mm thick x 750 mm wide for building facades and weatherstripping. Fits HTS 7409.29.00.50 as wide brass sheet with characteristic red color from high copper content.
C27200 Yellow Brass Nameplate Sheet
C27200 yellow brass sheets (65/35 Cu-Zn), 0.4 mm x 510 mm wide, serve for engraved nameplates and instrument panels. HTS 7409.29.00.50 classification for this wide, thin brass per copper-zinc base alloy specs.
C28000 Muntz Metal Valve Sheet
C28000 Muntz metal sheets (60/40 Cu-Zn), 3 mm thick x 650 mm wide, used for valve discs and pump components. Qualifies under HTS 7409.29.00.50 as standard wide brass plate meeting thickness and alloy criteria.
C44300 Admiralty Brass Flange Sheet
C44300 admiralty brass (71/28/1 Cu-Zn-Sn) sheets, 1.5 mm x 560 mm wide for flange blanks and tube supports. HTS 7409.29.00.50 due to tin <3%, zinc dominant brass alloy in wide plate dimensions.