C26000 Cartridge Brass Coil
C26000 cartridge brass coil is a copper-zinc base alloy (70% copper, 30% zinc) plate/sheet/strip in coil form with thickness exceeding 0.15 mm, used for ammunition casings and precision stamping. It falls under HTS 7409.21.00 due to its brass composition and coil presentation as defined in subheading note (a).
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill test certificate verifying copper-zinc composition meets brass definition (zinc predominant, Ni<5%, Sn<3%)
• Confirm thickness >0.15mm and coil form via packing list; uncoiled sheets classify under 7409.21.50
• Avoid misclassification as copper-nickel-zinc if Ni≥5%; test reports prevent duty disputes
Related Products under HTS 7409.21.00
C26800 Yellow Brass Coil Stock
C26800 yellow brass coil features 65% copper and 35% zinc, supplied as strip over 0.15 mm thick for heat exchanger fins and radiator components. Classified under 7409.21.00 as copper-zinc base alloy in coils per subheading note (a).
C46400 Naval Brass Coil Strip
C46400 naval brass (59% Cu, 39.25% Zn, 1% Sn) coil over 0.15 mm thick for marine hardware and propeller shafts. Falls under 7409.21.00 as brass (Sn<3%, Zn predominant) in coil form.
C69430 Silicon Brass Coil
C69430 silicon brass coil (Cu-22%Zn-4%Si-1.5%Mn) over 0.15 mm for valve stems and fittings. Zinc predominant over Si/Mn classifies as brass per note (a), in coils → 7409.21.00.
CDA 385 Extruded Brass Coil
CDA 385 (58% Cu, 39% Zn, 3% Pb) coil strip >0.15 mm for plumbing adapters. Free-machining brass in continuous coil form per 7409.21.00.
Architectural Brass C38500 Coil
C38500 architectural brass coil (58% Cu rem. Zn) >0.15 mm thick for door hardware stamping. Standard brass composition qualifies for 7409.21.00 coils.
C36000 Free-Cutting Brass Coil
C36000 free-cutting brass coil (60-63% Cu, remainder Zn with Pb) thickness >0.15 mm in coil for screw machine products and fasteners. HTS 7409.21.00 applies as copper-zinc base alloy per definition (a), lead permitted as minor element.