C26800 Yellow Brass Strip Coil 0.8mm x 400mm
Coiled strip of C26800 yellow brass, 0.8 mm thick and 400 mm wide, conforming to copper-zinc base alloy specs. Classified in HTS 7409.21.00.90 for brass plates/sheets/strips in coils under specific dimensions. Ideal for decorative trim and fasteners.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If refined copper, not alloyed
Pure copper coils (not zinc alloy) fall under 7409.11.00 for <500mm width.
If thickness ≤0.15 mm
Thinner brass foil (<0.15 mm) classifies under heading 7407 for copper foils.
If imported as finished screw/nail blanks
Brass bars/rods shaped for nails/screws move to 7415 based on end form.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide detailed chemical analysis proving brass alloy per subheading note (a)
• Watch for coil weight limits in shipping docs
• Common pitfall: mismeasuring width leads to 7409.22 reclassification
Related Products under HTS 7409.21.00.90
C26000 Brass Coil Strip 0.5mm Thick 300mm Wide
A coil of C26000 cartridge brass plate in strip form, with thickness of 0.5 mm and width of 300 mm, made from copper-zinc alloy where zinc predominates. This falls under HTS 7409.21.00.90 as brass coil under 5 mm thick, less than 500 mm wide, and not specifically excluded. Commonly used for electrical connectors and hardware components.
C36000 Free-Cutting Brass Coil 1.2mm Thick 250mm Wide
C36000 free-machining brass in coil form, 1.2 mm thickness and 250 mm width, zinc-dominant copper alloy. HTS 7409.21.00.90 applies to such narrow, thin brass coils. Used extensively in plumbing fittings and machined parts.
C46400 Naval Brass Strip Coil 0.3mm x 450mm
High-strength C46400 naval brass coil strip, 0.3 mm thick, 450 mm wide, meeting brass alloy criteria with low tin. Fits HTS 7409.21.00.90 for thin, narrow brass coils. Applied in marine hardware and valves.
C69300 Brass Coil Sheet 2.0mm Thick 100mm Wide
C69300 leaded brass coil, 2.0 mm thick and 100 mm wide, copper-zinc base with machining additives. HTS 7409.21.00.90 covers this narrow/thin brass coil configuration. Suited for precision instrument components.
C22000 Red Brass Narrow Coil 0.4mm x 350mm
C22000 commercial red brass strip coil, 0.4 mm thickness, 350 mm width, classic low-zinc brass alloy. Under HTS 7409.21.00.90 as qualifying brass coil dimensions. Popular for radiators and heat exchangers.
C23000 Low Brass Strip Coil 1.5mm Thick 480mm Wide
C23000 low brass (15% zinc) in coiled strip, 1.5 mm thick, 480 mm wide, fitting brass alloy definition. HTS 7409.21.00.90 for such thin, narrow coils. Used in musical instruments and architectural trim.