C102 Deoxidized Copper Coil Stock 2.0mm Thick
Phosphorus deoxidized copper C102 in coil form, 2.0 mm thickness, suited for plumbing fittings and architectural flashing. Falls under HTS 7409.11.50 as refined copper strip/plates in coils less than 5 mm thick. Refined through electrolytic process with low phosphorus for weldability.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If copper-nickel base alloys
Alloys where nickel predominates and zinc ≤1% per note (d) use nickel alloy subheadings.
If shaped into tubes or profiles
Refined copper tubes/pipes from such strip classify under 7411 if formed beyond flat strip.
If silver content high enough for separate category
Copper-silver alloys with significant silver move to specific precious metal alloy headings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document deoxidation process and phosphorus content (<0.015%) to confirm refined non-alloy status
• Coils must remain wound; partial processing en route risks reclassification as parts
Related Products under HTS 7409.11.50
High Purity Annealed Copper Sheet Coil 3.5mm
Annealed refined copper sheets in coils, 3.5 mm thick, for heat exchanger fins and bus conductors. HTS 7409.11.50 covers this refined copper product in coils under 5 mm. Annealing softens for better formability while maintaining 99.9%+ purity.
C120 Semi-Hard DHP Copper Strip Coil 0.3mm
Deoxidized high phosphorus (DHP) copper C120 strip coil, 0.3 mm thick in semi-hard temper, for HVAC coils. Classified HTS 7409.11.50 for refined copper in coils 0.15-5 mm thick. Low oxygen enhances corrosion resistance.
Refined Copper Roofing Strip Coil 1.5mm
Refined copper strip in coils for roofing and flashing, 1.5 mm thick, with natural patina development. HTS 7409.11.50 due to refined copper, coil form, thickness specs.
Busbar Grade ETP Copper Coil 4.0mm
ETP copper coil stock 4.0 mm thick for electrical busbars, high IACS conductivity.
Transformer Winding Copper Strip 0.2mm
Ultra-thin refined copper strip coil 0.2 mm for transformer windings.
Heat Sink Copper Fin Stock Coil 1.0mm
C110 copper coil 1.0 mm for heat sink fins.