C102 Refined Copper Strip Coil
C102 phosphor-deoxidized refined copper strip in coil, 2.0 mm thick x 400 mm wide, for busbars. HTS 7409.11.5050 due to refined (non-alloy) status, coil form, and dimension compliance. Low phosphorus aids weldability.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If same specs but width ≥500 mm
Width threshold determines subheading 7409.21 vs 7409.11.
If supplied in straight sheets not coils
Non-coiled presentation uses 7408 plates/sheets heading.
If nickel-plated surface
Surface-worked copper (e.g., plated) moves to Chapter 74 worked heading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Phosphorus content cert <0.015% confirms refined vs alloy status
• Declare temper (hard/soft); affects value for duty calculation
• Coil weight limits—over 5 tons may trigger special handling
Related Products under HTS 7409.11.50.50
ETP Grade Refined Copper Strip Coil
Electrolytic tough pitch (ETP) refined copper strip in coil form, 0.4 mm thick and 450 mm wide, ideal for transformer windings. Classified under HTS 7409.11.5050 due to refined copper composition, coil presentation, and dimensions under specified limits. Meets high conductivity standards for electrical use.
C101 Refined Copper Sheet Coil
C101 oxygen-free refined copper sheet in coil, 1.2 mm thickness and 400 mm width, used in heat exchangers. Fits HTS 7409.11.5050 for refined copper coils under 5 mm thick and <500 mm wide. High purity supports thermal applications.
Annealed Refined Copper Ribbon for Heat Sinks
Soft-annealed refined copper ribbon coil, 0.8 mm x 480 mm wide, used in heat sink fins. Falls under HTS 7409.11.5050 for refined copper coils under 5 mm thick and <500 mm width. Annealing enhances thermal conductivity.
Battery Tab Refined Copper Foil Coil
Ultra-thin refined copper foil coil for lithium battery tabs, 0.15 mm thick x 150 mm wide. Precisely matches HTS 7409.11.5050 criteria for refined copper coils with thin strip dimensions. High ductility for tab welding.
RF Shielding Refined Copper Tape Coil
Refined copper tape coil for EMI/RF shielding, 0.25 mm x 300 mm wide, in continuous coil. HTS 7409.11.5050 classification for refined copper strip coils under size limits. Adhesive-free for cleanroom applications.
C-110 Refined Copper Foil Coil
A coil of refined C-110 copper foil with thickness 0.2 mm and width 300 mm, used for electrical applications like PCB manufacturing. It falls under HTS 7409.11.5050 as refined copper strip in coils, thickness under 5 mm, and width less than 500 mm. The high purity refined copper distinguishes it from alloyed variants.