10 mm Diameter Electrolytic Tough Pitch Copper Wire
Electrolytic tough pitch (ETP) copper wire with a 10.2 mm cross-sectional dimension, commonly used in transformer windings and heavy electrical connections. Classified under HTS 7408.11.30.00 due to its refined copper composition and cross-section exceeding 9.5 mm, distinguishing it from finer wires. This high-conductivity wire meets ASTM B5 standards for electrical applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If maximum cross-sectional dimension is 6 mm to 9.5 mm
Slightly thinner refined copper wire falls into the adjacent thickness subheading within the same 7408.11 category.
If in unwrought forms like billets before drawing
Unwrought refined copper in forms like billets or cakes is under 7403, prior to wire production processing.
If insulated with plastic or rubber coating
Any insulation moves the wire to Chapter 85 as electrical conductors, regardless of copper specs.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Obtain ASTM B5 or equivalent purity certification to prove refined copper status and avoid alloy misclassification
• Use precise caliper measurements for cross-section; discrepancies can trigger CBP reclassification and penalties
• Declare if oxygen-free to differentiate from standard ETP, though both remain under 7408 for uninsulated wire
Related Products under HTS 7408.11.30.00
12 AWG Refined Copper Bus Wire
This is a straight length of refined copper wire with a 10 mm diameter cross-section, used primarily in electrical bus bar applications for power distribution. It falls under HTS 7408.11.30.00 because it is made of refined copper and has a maximum cross-sectional dimension over 9.5 mm, exceeding the 6 mm threshold for this subheading. The wire is typically supplied in coils or straight lengths for industrial assembly.
15 mm Oxygen-Free Copper Round Wire
Oxygen-free high-conductivity (OFHC) copper wire featuring a 15 mm diameter, ideal for high-purity applications in RF equipment and vacuum systems. It qualifies for HTS 7408.11.30.00 as refined copper wire with cross-section well over 9.5 mm and no alloying elements beyond trace impurities. Supplied in continuous lengths for precision cutting.
Phosphorized Refined Copper Welding Wire
12.7 mm diameter phosphorized refined copper wire used for gas-shielded welding applications in marine and plumbing industries. Falls under HTS 7408.11.30.00 as it's refined copper (phosphorus deoxidized per ASTM B280) with cross-section over 9.5 mm. The trace phosphorus (<0.015%) doesn't qualify as alloying.
Heavy Gauge C10100 Refined Copper Wire
C10100 grade refined copper wire with 11 mm cross-section, featuring 99.99% purity for audio equipment grounding and high-end electrical feeds. Classified in HTS 7408.11.30.00 due to refined copper material and dimension exceeding 9.5 mm limits. Meets UNS C10100 specifications for maximum conductivity.
11.5 mm Deoxidized Non-Arsenical Copper Wire
Deoxidized high phosphorus (DHP) copper wire, UNS C12200, with 11.5 mm diameter for plumbing and HVAC ground straps. HTS 7408.11.30.00 applies as refined copper wire over 9.5 mm cross-section; phosphorus content qualifies as deoxidizer not alloy. Excellent corrosion resistance for moist environments.
Industrial 3/8-Inch Refined Copper Ground Wire
9.525 mm (0.375 inch) refined copper wire specifically for electrical grounding systems in commercial buildings. Precisely meets HTS 7408.11.30.00 criteria: refined copper, maximum cross-sectional dimension just over 9.5 mm threshold. Bare conductor design per NEC requirements.